yea I thought so to pretty sure that's the issue
already got some new ones on the way

Hey Guys

Best wishes for 2017

I think I am loosing my mind or I am overlooking something

I have saveral esp12 devices one is a nodemcu 1.0
wired everthing according to the sp8266 gateway page

its sees the radio but i will not comunicate to the sensor node

the sensor node is a arduino nano running the dallas temp sensor sketch

both the esp side as the nano side have a cap directtly solder to the nrf
but the sensor side will never see the gw

Gw debug info

‚n?†$“¦£ÿ_CAJþû0;255;3;0;9;MCO:BGN:INIT GW,CP=RNNGE--,VER=2.2.0-beta
0;255;3;0;9;TSF:LRT:OK
0;255;3;0;9;TSM:INIT
0;255;3;0;9;TSF:WUR:MS=0
scandone
state: 0 -> 2 (b0)
state: 2 -> 3 (0)
state: 3 -> 5 (10)
add 0
aid 9
cnt

connected with Martijn, channel 13
dhcp client start...
0;255;3;0;9;TSM:INIT:TSP OK
0;255;3;0;9;TSM:INIT:GW MODE
0;255;3;0;9;TSM:READY:ID=0,PAR=0,DIS=0
0;255;3;0;9;MCO:REG:NOT NEEDED
f r0, scandone
....ip:192.168.1.85,mask:255.255.255.0,gw:192.168.1.1
.IP: 192.168.1.85
0;255;3;0;9;MCO:BGN:STP
0;255;3;0;9;MCO:BGN:INIT OK,TSP=1
pm open,type:2 0

Sensor side

0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.2.0-beta
4 TSM:INIT
4 TSF:WUR:MS=0
11 TSM:INIT:TSP OK
13 TSM:FPAR
1612 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
3620 !TSM:FPAR:NO REPLY
3622 TSM:FPAR
5222 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
7230 !TSM:FPAR:NO REPLY
7232 TSM:FPAR
8832 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
10840 !TSM:FPAR:NO REPLY
10842 TSM:FPAR
12441 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
14449 !TSM:FPAR:FAIL
14450 TSM:FAIL:CNT=1
14452 TSM:FAIL:PDT

the only other problem i can think of is that these are the problem

http://www.banggood.com/3Pcs-NRF24L01-SI24R1-2_4G-Wireless-Power-Enhanced-Communication-Receiver-Module-p-1057155.html?rmmds=myorder

have some other ones on the way for testing