Navigation

    • Register
    • Login
    • OpenHardware.io
    • Categories
    • Recent
    • Tags
    • Popular
    1. Home
    2. monkee
    3. Posts
    • Profile
    • Following
    • Followers
    • Topics
    • Posts
    • Best
    • Groups

    Posts made by monkee

    • RE: Radio no longer working after new Hassbian install

      I had the same problem and can confirm that development version works better.

      posted in Troubleshooting
      monkee
      monkee
    • RE: rpi+mqtt+hass: persistence_file - file does not exist or is not readable

      @gohan
      New Arduino wired and conncted, uploaded sketch, etc.
      Same result.

      @martinhjelmare
      I changed the hass cfg to:

      417 mysensors:
      418   gateways:
      419     - device: mqtt
      420       persistence_file: '/home/homeassistant/.homeassistant/mysensors.json'
      421       topic_in_prefix: 'mysensors-out'
      422       topic_out_prefix: 'mysensors-in'
      

      Now its the same as reported in the gateway log...

      Its working. Thanks guys!

      One last question, just to be clear:
      Its fine to have "#define CHILD_ID 0", right?

      posted in Home Assistant
      monkee
      monkee
    • RE: rpi+mqtt+hass: persistence_file - file does not exist or is not readable

      @gohan Did as you suggested (cleared the rom) and changed the line from "#define CHILD_ID 0" to "#define CHILD_ID 3". Now I get:

      0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.1.1
      3 TSM:INIT
      6 TSF:WUR:MS=0
      13 TSM:INIT:TSP OK
      15 !TSF:SID:FAIL,ID=0
      17 TSM:FAIL:CNT=1
      18 TSM:FAIL:PDT
      10021 TSM:FAIL:RE-INIT
      10023 TSM:INIT
      10031 TSM:INIT:TSP OK
      10033 !TSF:SID:FAIL,ID=0
      10035 TSM:FAIL:CNT=2
      10037 TSM:FAIL:PDT
      20040 TSM:FAIL:RE-INIT
      20042 TSM:INIT
      20049 TSM:INIT:TSP OK
      20051 !TSF:SID:FAIL,ID=0
      20054 TSM:FAIL:CNT=3
      20056 TSM:FAIL:PDT
      30059 TSM:FAIL:RE-INIT
      30061 TSM:INIT
      30068 TSM:INIT:TSP OK
      30070 !TSF:SID:FAIL,ID=0
      30072 TSM:FAIL:CNT=4
      

      @martinhjelmare
      I have the controller connected? Means I have started home-assistant on a rpi (connected with the sensor network i hope, as explained here https://www.mysensors.org/build/raspberry ) What could be wrong?

      posted in Home Assistant
      monkee
      monkee
    • RE: rpi+mqtt+hass: persistence_file - file does not exist or is not readable

      @martinhjelmare
      Thank you for your reply.
      I am using the moisture sensor. https://www.mysensors.org/build/moisture
      I just copied the sketch. As far as I understand it, there are no changes necessary.

      This is some output from the Arduino Seriel Monitor:

      112455 TSM:ID:REQ
      112458 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK:
      114465 !TSM:ID:FAIL
      114466 TSM:FAIL:CNT=6
      114468 TSM:FAIL:PDT
      124471 TSM:FAIL:RE-INIT
      124473 TSM:INIT
      124480 TSM:INIT:TSP OK
      124482 TSM:FPAR
      124485 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
      124566 TSF:MSG:READ,0-0-255,s=255,c=3,t=8,pt=1,l=1,sg=0:0
      124571 TSF:MSG:FPAR OK,ID=0,D=1
      126493 TSM:FPAR:OK
      126494 TSM:ID
      126496 TSM:ID:REQ
      126499 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK:
      128506 TSM:ID
      128507 TSM:ID:REQ
      128510 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK:
      130518 TSM:ID
      130519 TSM:ID:REQ
      130522 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK:
      132529 TSM:ID
      132530 TSM:ID:REQ
      132533 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK:
      134540 !TSM:ID:FAIL
      134541 TSM:FAIL:CNT=7
      134544 TSM:FAIL:PDT
      194546 TSM:FAIL:RE-INIT
      194548 TSM:INIT
      194555 TSM:INIT:TSP OK
      194557 TSM:FPAR
      194561 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
      194913 TSF:MSG:READ,0-0-255,s=255,c=3,t=8,pt=1,l=1,sg=0:0
      194918 TSF:MSG:FPAR OK,ID=0,D=1
      196569 TSM:FPAR:OK
      196570 TSM:ID
      196572 TSM:ID:REQ
      196575 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK:
      198582 TSM:ID
      198583 TSM:ID:REQ
      198586 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK:
      200593 TSM:ID
      200594 TSM:ID:REQ
      200597 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK:
      202604 TSM:ID
      202605 TSM:ID:REQ
      202608 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK:
      204615 !TSM:ID:FAIL
      204616 TSM:FAIL:CNT=7
      204618 TSM:FAIL:PDT
      

      This is some output from the mysgw.service
      ( tail -n 40 -F /var/log/syslog | grep mysgw)

      Mar 29 17:36:52 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0:
      Mar 29 17:36:52 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3
      Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
      Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:BC
      Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:FPAR REQ,ID=255
      Mar 29 17:37:56 raspberrypi mysgw: TSF:PNG:SEND,TO=0
      Mar 29 17:37:56 raspberrypi mysgw: TSF:CKU:OK
      Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:GWL OK
      Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
      Mar 29 17:37:58 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0:
      Mar 29 17:37:58 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3
      Mar 29 17:38:02 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0:
      Mar 29 17:38:02 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3
      Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
      Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:BC
      Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:FPAR REQ,ID=255
      Mar 29 17:39:06 raspberrypi mysgw: TSF:PNG:SEND,TO=0
      Mar 29 17:39:06 raspberrypi mysgw: TSF:CKU:OK
      Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:GWL OK
      Mar 29 17:39:07 raspberrypi mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
      Mar 29 17:39:08 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0:
      Mar 29 17:39:08 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3
      Mar 29 17:39:10 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0:
      Mar 29 17:39:10 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3
      Mar 29 17:39:12 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0:
      Mar 29 17:39:12 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3
      Mar 29 17:39:14 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0:
      Mar 29 17:39:14 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3
      

      Can you help me understand those logs? As far as I interpret it, the moisture sensor runs (but gets no ID from time to time?!) (346778 !TSM:ID:FAIL)....
      Does my moisture sensor send updates? Does it work?

      Thank you!

      posted in Home Assistant
      monkee
      monkee
    • rpi+mqtt+hass: persistence_file - file does not exist or is not readable

      Hey guys,

      I have tried a lot but I am running out of ideas:

      Mar 28 23:48:02 raspberrypi hass[4183]: #033[0m
      Mar 28 23:48:02 raspberrypi hass[4183]: #033[32m17-03-28 23:48:02 INFO (MainThread) [homeassistant.core] Bus:Handling <Event component_loaded[L]: component=introduction>#033[0m
      Mar 28 23:48:02 raspberrypi hass[4183]: #033[32m17-03-28 23:48:02 INFO (MainThread) [homeassistant.bootstrap] Setting up recorder#033[0m
      Mar 28 23:48:02 raspberrypi hass[4183]: #033[32m17-03-28 23:48:02 INFO (MainThread) [homeassistant.core] Bus:Handling <Event component_loaded[L]: component=recorder>#033[0m
      Mar 28 23:48:02 raspberrypi hass[4183]: #033[32m17-03-28 23:48:02 INFO (MainThread) [homeassistant.bootstrap] Setting up logger#033[0m
      Mar 28 23:48:02 raspberrypi hass[4183]: #033[33m17-03-28 23:48:02 WARNING (Thread-5) [homeassistant.components.emulated_hue] Listen IP address not specified, auto-detected address is 192.168.1.9#033[0m
      Mar 28 23:48:07 raspberrypi hass[4183]: #033[33m17-03-28 23:48:07 WARNING (Thread-1) [mysensors.mysensors] File does not exist or is not readable: /home/homeassistant/.homeassistant/mysensors.json#033[0m
      Mar 28 23:48:07 raspberrypi hass[4183]: #033[33m17-03-28 23:48:07 WARNING (Thread-1) [mysensors.mysensors] Trying backup file: /home/homeassistant/.homeassistant/mysensors.json.bak#033[0m
      Mar 28 23:48:07 raspberrypi hass[4183]: #033[33m17-03-28 23:48:07 WARNING (Thread-1) [mysensors.mysensors] File does not exist or is not readable: /home/homeassistant/.homeassistant/mysensors.json.bak#033[0m
      Mar 28 23:48:07 raspberrypi hass[4183]: #033[33m17-03-28 23:48:07 WARNING (Thread-1) [mysensors.mysensors] Failed to load sensors from file: /home/homeassistant/.homeassistant/mysensors.json#033[0m
      Mar 28 23:48:18 raspberrypi hass[4183]: #033[32m17-03-28 23:48:18 INFO (Thread-14) [mysensors.mysensors] Setting up initial MQTT topic subscription#033[0m
      Mar 28 23:48:18 raspberrypi hass[4183]: #033[36m17-03-28 23:48:18 DEBUG (Thread-14) [mysensors.mysensors] Subscribing to: P/+/+/0/+/+#033[0m
      Mar 28 23:48:18 raspberrypi hass[4183]: #033[36m17-03-28 23:48:18 DEBUG (Thread-14) [mysensors.mysensors] Subscribing to: P/+/+/3/+/+#033[0m
      
      415 mysensors:
      416   gateways:
      417     - device: mqtt
      418       persistence_file: '/home/homeassistant/.homeassistant/mysensors.json'
      419 #      persistence_file: '/home/pi/mysensors.json'
      420 #      persistence_file: '/tmp/mysensors-moist.json'
      421       #topic_in_prefix: 'mygateway1-out'
      422       topic_in_prefix: 'P'
      423       #topic_out_prefix: 'mygateway1-in'
      424       topic_out_prefix: 'S'
      425   debug: true
      426   optimistic: false
      427   persistence: true
      428   retain: true
      429   version: 2.0
      

      Anybody knows why I cant create the persistance file?

      posted in Home Assistant
      monkee
      monkee