Radio no longer working after new Hassbian install
-
I had a perfectly working MySensors Pi Gateway working on Ethernet alongside a Home Assistant install on the same Pi.
I decided to upgrade the Home Assistant to the latest Hassbian image which meant reinstallation of MySensors. Everything installed OK however now MySensors fails to talk to the radio. Nothing was physically changed on the Pi so I'm reasonably certain the radio and wiring are OK although I have since added a cap on the power supply pins.
Any thoughts?
Here is the debugging output:
pi@ShedHA:~/MySensors $ ./bin/mysgw -d mysgw: Starting gateway... mysgw: Protocol version - 2.1.1 mysgw: MCO:BGN:INIT GW,CP=RNNG---,VER=2.1.1 mysgw: TSM:INIT mysgw: TSF:WUR:MS=0 mysgw: !TSM:INIT:TSP FAIL mysgw: TSM:FAIL:CNT=1 mysgw: TSM:FAIL:PDT mysgw: TSM:FAIL:RE-INIT mysgw: TSM:INIT mysgw: !TSM:INIT:TSP FAIL mysgw: TSM:FAIL:CNT=2 mysgw: TSM:FAIL:PDT mysgw: TSM:FAIL:RE-INIT mysgw: TSM:INIT mysgw: !TSM:INIT:TSP FAIL mysgw: TSM:FAIL:CNT=3```
-
There are some issues with 2.1.1, try with development version
-
I had the same problem and can confirm that development version works better.
-
Installed development version and all working 100%. Thanks for the help.
4 out of 4
Suggested Topics
-
Day 1 - Status report
Announcements • 23 Mar 2014, 22:45 • hek 24 Mar 2014, 20:12 -
Some sensors permanently fail after one/two years
Troubleshooting • 25 Jul 2024, 17:17 • Kokosnoot 25 Jul 2024, 17:17 -
Raspberry Pi 5: invalid GPIO 9
Troubleshooting • 27 Aug 2024, 13:20 • igo 27 Aug 2024, 13:20 -
Compiling Sensor code using BME280 and ESP8266
Troubleshooting • 11 days ago • dpcons 11 days ago -
Echo request is not set
Troubleshooting • 12 Aug 2024, 15:36 • kamilb85 3 Sept 2024, 08:58 -
NODs stop responding, but ping works.
Troubleshooting • about 8 hours ago • Marcin about 8 hours ago