I not sure where to look version on open hub
I tried on console do this
openhab> version
4.0.4
openhab> bundle:list
START LEVEL 100 , List Threshold: 50
ID | State | Lvl | Version | Name

175 | Active | 80 | 2.0.0.201610280647 | MySensors Binding
197 | Active | 80 | 2.0.0.201611011523 | openHAB Serial Transport Bundle

One more thing - I installed Domoticz there every thing works. I got readings from Temperature and Humidity also UV values was displayed normally. I assume the PC/Windows10 (in my case) Regional settings is different from Open hubs - my decimal separator is coma, instead of dot. I will try change settings, then report.

Hello! I got my network gateway working on openHub it is online, when i add relay sensor it works, its online and i can change it. But problem is when i add any receiving device like UV or DHT22 where i have to receive some number i got offline status and "NaN" values. But in MYSConntroller i got response from device in debug tab i receive new values on each change "13.11.2016 01:56:36 RX 2;0;1;0;11;3.04", does anyone has some ides? Btw I used example code from mysensors with no chages.