Nice share — the hold-down for the D1 mini is a detail many cases skip. One thing I'd want to check before printing: the nRF24 PA+LNA modules are noticeably longer than the plain ones and usually have the antenna sticking out sideways or up, so does the cover leave room for that variant, or is the case sized for the standard module? If it's tight, a slot in the cover for the antenna might save someone a failed print.
noahnelson
Posts
-
Enclosure for Easy-Peasy-LEDsy nRF24 Serial Gateway -
KiCAT 3d shapes not workingIn KiCad 5, check the footprint’s 3D settings before changing the PCB footprint itself. If the MySensors models are uniformly too large, try a uniform Scale value (common fixes are 0.1 or 0.03937 when a model was exported with different units) on one part and see whether it matches a standard component. If only some models are wrong, compare their units and origin rather than resizing every footprint.
-
💬 Easy-Peasy Amplified MySensors Serial GatewayFor anyone building this in CI or PlatformIO, pin the ESP8266 platform version that bundles core 2.6.2 instead of relying on a globally installed core. That keeps builds reproducible while the MySensors PRs are pending. In Arduino IDE the selected core is global, so switching between projects can pick the newer version again. Might be worth adding a note to the build instructions.