Posts made by ogghst

ogghst

I upgraded my sensors and openhab binding from 2.1 to 2.2.. i noticed that my smartsleep nodes are no longer working. Found that the message type to sleep has been changed. Moreover, no updates are sent to the gateway from the client.

Do I have to change something in the things file and/or in the sensor code?

Cannot find anything on posts or docs, please help!

ogghst

@gohan thanks, however the issue i'm having is not in the HVAC implementation, but in the messaging..

ogghst

Hello to all and thanks for this incredible library!

I have a sensor that is controlling my climate system through an IR led.
I have Openhab2.2 as controller with mysensors 2.3 addon, a mysensors 2.1.1 serial gateway, and a mysensors 2.1.1 NRF24 node presenting an S_HVAC sensor:

  present(CHILD_ID_HVAC,  S_HVAC, "Controllo Climatizzatore");

it implements all the functionalities of an HVAC system by receiving and sending back several message types:

MyMessage msgSmHvacTemp(CHILD_ID_HVAC, V_TEMP);                         //mapped to temperature
MyMessage msgSmHvacFlowState(CHILD_ID_HVAC, V_HVAC_FLOW_STATE);           //mapped to HvacMode
MyMessage msgSmHvacSpeed(CHILD_ID_HVAC, V_HVAC_SPEED);               //mapped to HvacFanMode
MyMessage msgSmHvacFlowMode(CHILD_ID_HVAC, V_HVAC_FLOW_MODE);          //mapped to HvacVanneMode
MyMessage msgSmHvacSetPointCool(CHILD_ID_HVAC, V_HVAC_SETPOINT_COOL); //mapped to temperature
MyMessage msgSmHvacSetPointHeat(CHILD_ID_HVAC, V_HVAC_SETPOINT_HEAT); //mapped to temperature

the sensor goes in smartsleep mode every 30 seconds.

everything works fine if I adjust one parameter per sleep cycle on my controller, but if I set more than one parameter (e.g. temperature and fan speed) only one message is sent from openhab:

2018-04-28 15:53:40.906 [DEBUG] [otocol.MySensorsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:MSG:READ,9-9-0,s=255,c=3,t=22,pt=5,l=4,sg=0:3098
2018-04-28 15:53:40.907 [DEBUG] [otocol.MySensorsAbstractConnection$MySensorsReader] - Message from gateway received: 9;255;3;0;22;3098
2018-04-28 15:53:40.908 [DEBUG] [otocol.MySensorsAbstractConnection$MySensorsWriter] - Sending to MySensors: 9;0;1;1;22;3
2018-04-28 15:53:40.908 [DEBUG] [otocol.MySensorsAbstractConnection$MySensorsWriter] - Message for nodeId: 9 in queue needs to be send immediately!
2018-04-28 15:53:40.962 [DEBUG] [otocol.MySensorsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:MSG:SEND,0-0-9-9,s=0,c=1,t=22,pt=0,l=1,sg=0,ft=0,st=OK:3
2018-04-28 15:53:40.963 [DEBUG] [otocol.MySensorsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:MSG:READ,9-9-0,s=0,c=1,t=22,pt=0,l=1,sg=0:3
2018-04-28 15:53:40.964 [DEBUG] [otocol.MySensorsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:MSG:ACK
2018-04-28 15:53:40.965 [DEBUG] [otocol.MySensorsAbstractConnection$MySensorsReader] - Message from gateway received: 9;0;1;1;22;3

is this a bug or I misunderstood the queue system of smartsleep? there a workaround for this?