@mfalkvidd
this is how i have connected
rajbadri
@rajbadri
Best posts made by rajbadri
Latest posts made by rajbadri
-
RE: Office plant monitoring
@mfalkvidd
i have now connected two analog pins A0 and A1 of Pro Mini to the A0 pin of the soil sensor and now i am getting a constant reading of 98% humidity (in water or outside dry).please guide
Thanks
-
RE: Office plant monitoring
@mfalkvidd
i am using your sketch for indoor plant monitoring but have modified the sleep time to one hour . the problem i am facing is that every alternate humidity reading i get is a 0
like
first reading ------ 67%
second reading ----- 0%
third reading ------65%
fourth reading ------- 0%and likewise
Please Guide
Thanks
-
LDR gives wrong reading in domoticz
hi
i am using a electrodragon Photocell Light-Sensitive Module http://www.electrodragon.com/product/photoresistor-light-sensitive-module/
and using the light sensor sketch which comes in the examples of Mysensors
i am using domoticz controller on a raspberry pi.
the sketch runs fine and the arduino serial monitor shows that ldr is giving proper output to domoticz controller but for the reading display on domoticz are ok for the first few times and then it gives random output readingsthe arduino serial monitor is showing that the ldr is giving proper output all the time but somehow domoticz is not able to read it.
Thanks