@mfalkvidd
ok will try

@mfalkvidd
this is how i have connected

@mfalkvidd
i have now connected two analog pins A0 and A1 of Pro Mini to the A0 pin of the soil sensor and now i am getting a constant reading of 98% humidity (in water or outside dry).

please guide

Thanks

@mfalkvidd
its on analog pin A0

@mfalkvidd
i am using your sketch for indoor plant monitoring but have modified the sleep time to one hour . the problem i am facing is that every alternate humidity reading i get is a 0
like
first reading ------ 67%
second reading ----- 0%
third reading ------65%
fourth reading ------- 0%

and likewise

Please Guide

Thanks

hi
i am using a electrodragon Photocell Light-Sensitive Module http://www.electrodragon.com/product/photoresistor-light-sensitive-module/
and using the light sensor sketch which comes in the examples of Mysensors
i am using domoticz controller on a raspberry pi.
the sketch runs fine and the arduino serial monitor shows that ldr is giving proper output to domoticz controller but for the reading display on domoticz are ok for the first few times and then it gives random output readings

the arduino serial monitor is showing that the ldr is giving proper output all the time but somehow domoticz is not able to read it.

Thanks