Here is the Gateway assembled:

Same here...been out of this whole loop for the past 2 years and trying to get back into it.

The sensor is sending in the motion tripped signal and all, but like Carl above, the device is blank and the log shows "no type set" when I try to edit the new device.

Apr 11, 2016, 8:43:39 PM
  MySensors Debug                 receive raw 0;0;3;0;9;read: 0-0-0 s=1,c=1,t=16,pt=0,l=1,sg=0:1
  MySensors Debug                 receive raw 0;1;1;0;16;1
  MySensors Debug                 get device N0C1
  MySensors                       received '0:1' motion update to 1
  MySensors Debug                 receive raw 0;0;3;0;9;read: 0-0-0 s=1,c=1,t=16,pt=0,l=1,sg=0:1
  MySensors Debug                 receive raw 0;1;1;0;16;1
  MySensors Debug                 get device N0C1
  MySensors                       received '0:1' motion update to 1
  MySensors Debug                 device 8:255 not available: no type set
  MySensors Debug                 receive raw 0;0;3;0;9;read: 0-0-0 s=1,c=1,t=16,pt=0,l=1,sg=0:1
  MySensors Debug                 receive raw 0;1;1;0;16;1
  MySensors Debug                 get device N0C1
  MySensors                       received '0:1' motion update to 1
  MySensors Debug                 device 8:255 not available: no type set
  MySensors Debug                 receive raw 0;0;3;0;9;read: 0-0-0 s=1,c=1,t=16,pt=0,l=1,sg=0:1
  MySensors Debug                 receive raw 0;1;1;0;16;1
  MySensors Debug                 get device N0C1
  MySensors                       received '0:1' motion update to 1

Apr 11, 2016, 8:53:25 PM
  MySensors Debug                 receive raw 0;0;3;0;9;read: 0-0-0 s=1

@clippermiami Still waiting...gotta love ePacket Delivery from China. Never can tell when you'll get something.

@clippermiami Boards arrived...waiting on some sockets and a few other components to arrive so I can assemble it.

Here is the Gateway assembled:

Here is the link to the Gateway PCB I created, had fabricated and tested.

http://oshpark.com/shared_projects/qPdmZWG3

Keep in mind that OSH Park charges by the board size, and you get 3 of the boards. This one costs $14.65 for 3 copies.

Since few people need more than one it might make sense for users to pool together and order them as a group. That does mean one person will be responsible for ordering/paying and will have to ship the boards to the others.

Vodden and SirMeili have called dibs on the 2 spare ones from my prototype order.

Please give feedback.

Parts needed:
R1 and R3 - 220 ohm resistor (for RED and GREEN LEDs)
R2 - 470 ohm resistor (for BLUE LED)
R4 - 10K ohm resistor (INCLUDE button pull resistor)
C1 - 4.7uF electrolytic capacitor (4mm diameter - 2mm lead spacing)
Button - https://www.sparkfun.com/products/97
2x4-pin header socket - http://www.ebay.com/itm/10PCS-2x4-Pin-8P-2-54mm-Double-Row-Female-Straight-Header-Pitch-Socket-Pin-Strip-/310727244114

For the Nano socket...I used 2 of the 16-pin header sockets and cut one off with a Dremel to make a 15-pin strip.
http://www.ebay.com/itm/10-Pcs-2-54mm-Pitch-16-Pin-Female-Single-Row-Straight-Header-Strip-PH-8-5mm-/181108150525

Let me know if you have any questions.
Ross