Hey guys, I just found the proximity / LED ring example on the website as I am trying to do a similar project work with GPS instead of proximity sensor.

I have a small strip of 7 addressable sk6812 leds and I would like to have them turn on when certain distance has been achieved. I'm looking at the proximity LED ring example but I can't figure out which parts of that sketch could I incorporate in mine.

I would like to use the LED strip instead and have 3 criterias for 3 preset distances. For example,

• at 5m turn on led 1 and 2 in blue
• at 3m turn on led 3 4 5 in yellow
• at 1m turn all leds in red.

At the moment I only can use those clunky 5mm leds and void loop looks like this - this turns on the LED if the distance is 5m or less.

        Serial.print(F("Next in range = "));
        Serial.print(shortestDist, 2);
        Serial.println(" m");
        
        if (shortestDist < 5)   
        {
          digitalWrite(ledPin, HIGH);
        }

        else
        {                  
          digitalWrite(ledPin, LOW);
        }            

    }
    if (gps.charsProcessed() < 10)
        Serial.println(F("No GPS data."));
    last = millis();
    Serial.println();