Thanks and congratulations for the great site.
I put a 10uF capacitor in parallel of both modules.
Below the initial part of the sensor and then the total strings of the gateway (the gateway after these strings does not print any other data)
Debug Sensor:
16 MCO:BGN:INIT NODE,CP=RNNNA---,REL=255,VER=2.3.1
26 TSM:INIT
27 TSF:WUR:MS=0
33 TSM:INIT:TSP OK
35 TSM:FPAR
37 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
2046 !TSM:FPAR:NO REPLY
2049 TSM:FPAR
2051 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
4058 !TSM:FPAR:NO REPLY
4060 TSM:FPAR
4062 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
6069 !TSM:FPAR:NO REPLY
6071 TSM:FPAR
6073 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
8080 !TSM:FPAR:FAIL
8081 TSM:FAIL:CNT=1
8083 TSM:FAIL:DIS
8085 TSF:TDI:TSL
18087 TSM:FAIL:RE-INIT
18089 TSM:INIT
18096 TSM:INIT:TSP OK
18098 TSM:FPAR
18100 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
20108 !TSM:FPAR:NO REPLY
20110 TSM:FPAR
20112 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
22120 !TSM:FPAR:NO REPLY
Debug Gateway:
Ž@lðhà,LJ¬ðCXа47 MCO:BGN:INIT GW,CP=RNNGE---,REL=255,VER=2.3.1
98 TSF:LRT:OK
113 TSM:INIT
127 TSF:WUR:MS=0
150 TSM:INIT:TSP OK
scandone
state: 0 -> 2 (b0)
200 TSM:INIT:GW MODE
state: 2 -> 3 (0)
state: 3 -> 5 (10)
add 0
aid 7
cnt
connected with NETGEAR, channel 3
dhcp client start...
337 TSM:READY:ID=0,PAR=0,DIS=0
370 MCO:REG:NOT NEEDED
396 TSM:READY:NWD REQ
2678 TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=20,pt=0,l=0,sg=0,ft=0,st=OK:
scandone
2762 GWT:TPC:CONNECTING...
3290 GWT:TPC:CONNECTING...
3818 GWT:TPC:CONNECTING...
ip:192.168.0.63,mask:255.255.255.0,gw:192.168.0.1
4346 GWT:TPC:CONNECTING...
4374 GWT:TPC:IP=192.168.0.63
4405 MCO:BGN:STP
4423 MCO:BGN:INIT OK,TSP=1
4451 GWT:TPC:IP=192.168.0.63
4482 GWT:RMQ:MQTT RECONNECT
4541 GWT:RMQ:MQTT CONNECTED
4571 GWT:TPS:TOPIC=mygateway1-out/0/255/0/0/18,MSG SENT
pm open,type:2 0