Hello There !
for a past few months im working on ultra small (to fit behind switch ) ESP12F node to controll lights ( along with dimming function ) and temperature measurment.

I have done some tests - and so far so good but i need some help designing a proper PCB.

Here is what i`ve got :

Relays are DIP8 AQH3223 which can handle up to 250w ( perfect for lighting isn`t it ? )
ZeroCross detector PC814 with two high power 68K resistors
and 1-Wire temperature sensor.

And 3d design( without dimmer parts )

Ports:
Screw terminal - AC OUT
JST 3PIN - temperature sensor
JST 3PIN - Switch actuator
JST 2PIN - power.

so the goal here is to make it as small as possible ( sandwitch style :D) ( imagin there are 2.0mm pitch goldpins as connectors between boards - could not find them in KiCad.. )

Both, dimmer and relays has been testes and working with attached schematic so i would like to know if there is anyone who could help me designing a proper PCB for this thing ?

Regards.

Its actually an Optocoupler.

Hello.
Im looking for as simple AC dimmer as possible. Is this going to work ?:

AQH is non-zerro cross and can handle up to 1.2A

Hello,
I recently found a quite good SMD relay - the AQH series :
https://www.panasonic-electric-works.com/pew/eu/downloads/ds_61613_en_aqh.pdf

Which comes also in random type ( non zero-cross ) up to 1.2A

any ideas how to build AC dimmer using these ?