Skip to content
  • MySensors
  • OpenHardware.io
  • Categories
  • Recent
  • Tags
  • Popular
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Default (No Skin)
  • No Skin
Collapse
Brand Logo
  1. Home
  2. Troubleshooting
  3. Gateway not responding to I_ID_REQUEST from sensors

Gateway not responding to I_ID_REQUEST from sensors

Scheduled Pinned Locked Moved Troubleshooting
4 Posts 2 Posters 140 Views 2 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • R Offline
    R Offline
    rody82
    wrote on last edited by
    #1

    Hi all,

    I recently bought a Senserbender gateway and multiple micros from itead. Using NRF24 radios with the extra cap.

    It seems that the radio is working fine as soon as I turn on the sensor the gateway starts receiving requests I_ID_REQUEST

    114516 TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0:

    However there's no response on the gateway, I'm expecting it to send something back.

    I tried uploading the standard senserbend gateway serial sketch again with 2.3.2 (tried older libraries as well) but I get the same. Interestingly I had the same results using a standard arduino. I also have a couple of extra radios and tried multiple ones. Cleared eprom, using LOW power, tried moving them farther and closer.

    I have not yet tried uploading the sensor sketches as I don't have a programmer yet. Is there anything else I could try?

    logs:
    21:49:16.519 -> 0;255;3;0;9;3092 MCO:BGN:INIT GW,CP=RNNGS---,FQ=48,REL=255,VER=2.3.2
    21:49:16.552 -> 0;255;3;0;9;3121 TSF:LRT:OK
    21:49:16.552 -> 0;255;3;0;9;3121 TSM:INIT
    21:49:16.552 -> 0;255;3;0;9;3122 TSF:WUR:MS=0
    21:49:16.552 -> 0;255;3;0;9;3128 TSM:INIT:TSP OK
    21:49:16.552 -> 0;255;3;0;9;3128 TSM:INIT:GW MODE
    21:49:16.552 -> 0;255;3;0;9;3129 TSM:READY:ID=0,PAR=0,DIS=0
    21:49:16.552 -> 0;255;3;0;9;3129 MCO:REG:NOT NEEDED
    21:49:16.552 -> 0;255;3;0;14;Gateway startup complete.
    21:49:16.552 -> 0;255;0;0;18;2.3.2
    21:49:16.552 -> 0;255;3;0;9;3130 MCO:BGN:STP
    21:49:16.552 -> 0;255;3;0;9;3130 MCO:BGN:INIT OK,TSP=1
    21:49:16.552 -> 0;255;3;0;9;3131 TSM:READY:NWD REQ
    21:49:16.552 -> 0;255;3;0;9;3134 ?TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=20,pt=0,l=0,sg=0,ft=0,st=OK:
    21:51:05.796 -> 0;255;3;0;9;112458 TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0:
    21:51:05.796 -> 255;255;3;0;3;
    21:51:07.850 -> 0;255;3;0;9;114516 TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0:
    21:51:07.850 -> 255;255;3;0;3;
    21:51:09.903 -> 0;255;3;0;9;116568 TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0:
    21:51:09.903 -> 255;255;3;0;3;

    https://www.mysensors.org/build/parser?log=21%3A49%3A16.519 -> 0%3B255%3B3%3B0%3B9%3B3092 MCO%3ABGN%3AINIT GW%2CCP%3DRNNGS---%2CFQ%3D48%2CREL%3D255%2CVER%3D2.3.2 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3121 TSF%3ALRT%3AOK 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3121 TSM%3AINIT 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3122 TSF%3AWUR%3AMS%3D0 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3128 TSM%3AINIT%3ATSP OK 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3128 TSM%3AINIT%3AGW MODE 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3129 TSM%3AREADY%3AID%3D0%2CPAR%3D0%2CDIS%3D0 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3129 MCO%3AREG%3ANOT NEEDED 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B14%3BGateway startup complete. 21%3A49%3A16.552 -> 0%3B255%3B0%3B0%3B18%3B2.3.2 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3130 MCO%3ABGN%3ASTP 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3130 MCO%3ABGN%3AINIT OK%2CTSP%3D1 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3131 TSM%3AREADY%3ANWD REQ 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3134 %3FTSF%3AMSG%3ASEND%2C0-0-255-255%2Cs%3D255%2Cc%3D3%2Ct%3D20%2Cpt%3D0%2Cl%3D0%2Csg%3D0%2Cft%3D0%2Cst%3DOK%3A 21%3A51%3A05.796 -> 0%3B255%3B3%3B0%3B9%3B112458 TSF%3AMSG%3AREAD%2C255-255-0%2Cs%3D255%2Cc%3D3%2Ct%3D3%2Cpt%3D0%2Cl%3D0%2Csg%3D0%3A 21%3A51%3A05.796 -> 255%3B255%3B3%3B0%3B3%3B 21%3A51%3A07.850 -> 0%3B255%3B3%3B0%3B9%3B114516 TSF%3AMSG%3AREAD%2C255-255-0%2Cs%3D255%2Cc%3D3%2Ct%3D3%2Cpt%3D0%2Cl%3D0%2Csg%3D0%3A 21%3A51%3A07.850 -> 255%3B255%3B3%3B0%3B3%3B 21%3A51%3A09.903 -> 0%3B255%3B3%3B0%3B9%3B116568 TSF%3AMSG%3AREAD%2C255-255-0%2Cs%3D255%2Cc%3D3%2Ct%3D3%2Cpt%3D0%2Cl%3D0%2Csg%3D0%3A 21%3A51%3A09.903 -> 255%3B255%3B3%3B0%3B3%3B 21%3A51%3A11.949 -> 0%3B255%3B3%3B0%3B9%3B118621 TSF%3AMSG%3AREAD%2C255-255-0%2Cs%3D255%2Cc%3D3%2Ct%3D3%2Cpt%3D0%2Cl%3D0%2Csg%3D0%3A 21%3A51%3A11.949 -> 255%3B255%3B3%3B0%3B3%3B 21%3A51%3A13.998 -> 0%3B255%3B3%3B0%3B9%3B120675 TSF%3AMSG%3AREAD%2C255-255-0%2Cs%3D255%2Cc%3D3%2Ct%3D3%2Cpt%3D0%2Cl%3D0%2Csg%3D0%3A 21%3A51%3A13.998 -> 255%3B255%3B3%3B0%3B3%3B 21%3A51%3A16.081 -> 0%3B255%3B3%3B0%3B9%3B122733 TSF%3AMSG%3AREAD%2C255-255-0%2Cs%3D255%2Cc%3D3%2Ct%3D3%2Cpt%3D0%2Cl%3D0%2Csg%3D0%3A 21%3A51%3A16.081 -> 255%3B255%3B3%3B0%3B3%3B

    mfalkviddM 1 Reply Last reply
    0
    • R rody82

      Hi all,

      I recently bought a Senserbender gateway and multiple micros from itead. Using NRF24 radios with the extra cap.

      It seems that the radio is working fine as soon as I turn on the sensor the gateway starts receiving requests I_ID_REQUEST

      114516 TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0:

      However there's no response on the gateway, I'm expecting it to send something back.

      I tried uploading the standard senserbend gateway serial sketch again with 2.3.2 (tried older libraries as well) but I get the same. Interestingly I had the same results using a standard arduino. I also have a couple of extra radios and tried multiple ones. Cleared eprom, using LOW power, tried moving them farther and closer.

      I have not yet tried uploading the sensor sketches as I don't have a programmer yet. Is there anything else I could try?

      logs:
      21:49:16.519 -> 0;255;3;0;9;3092 MCO:BGN:INIT GW,CP=RNNGS---,FQ=48,REL=255,VER=2.3.2
      21:49:16.552 -> 0;255;3;0;9;3121 TSF:LRT:OK
      21:49:16.552 -> 0;255;3;0;9;3121 TSM:INIT
      21:49:16.552 -> 0;255;3;0;9;3122 TSF:WUR:MS=0
      21:49:16.552 -> 0;255;3;0;9;3128 TSM:INIT:TSP OK
      21:49:16.552 -> 0;255;3;0;9;3128 TSM:INIT:GW MODE
      21:49:16.552 -> 0;255;3;0;9;3129 TSM:READY:ID=0,PAR=0,DIS=0
      21:49:16.552 -> 0;255;3;0;9;3129 MCO:REG:NOT NEEDED
      21:49:16.552 -> 0;255;3;0;14;Gateway startup complete.
      21:49:16.552 -> 0;255;0;0;18;2.3.2
      21:49:16.552 -> 0;255;3;0;9;3130 MCO:BGN:STP
      21:49:16.552 -> 0;255;3;0;9;3130 MCO:BGN:INIT OK,TSP=1
      21:49:16.552 -> 0;255;3;0;9;3131 TSM:READY:NWD REQ
      21:49:16.552 -> 0;255;3;0;9;3134 ?TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=20,pt=0,l=0,sg=0,ft=0,st=OK:
      21:51:05.796 -> 0;255;3;0;9;112458 TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0:
      21:51:05.796 -> 255;255;3;0;3;
      21:51:07.850 -> 0;255;3;0;9;114516 TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0:
      21:51:07.850 -> 255;255;3;0;3;
      21:51:09.903 -> 0;255;3;0;9;116568 TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0:
      21:51:09.903 -> 255;255;3;0;3;

      https://www.mysensors.org/build/parser?log=21%3A49%3A16.519 -> 0%3B255%3B3%3B0%3B9%3B3092 MCO%3ABGN%3AINIT GW%2CCP%3DRNNGS---%2CFQ%3D48%2CREL%3D255%2CVER%3D2.3.2 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3121 TSF%3ALRT%3AOK 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3121 TSM%3AINIT 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3122 TSF%3AWUR%3AMS%3D0 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3128 TSM%3AINIT%3ATSP OK 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3128 TSM%3AINIT%3AGW MODE 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3129 TSM%3AREADY%3AID%3D0%2CPAR%3D0%2CDIS%3D0 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3129 MCO%3AREG%3ANOT NEEDED 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B14%3BGateway startup complete. 21%3A49%3A16.552 -> 0%3B255%3B0%3B0%3B18%3B2.3.2 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3130 MCO%3ABGN%3ASTP 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3130 MCO%3ABGN%3AINIT OK%2CTSP%3D1 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3131 TSM%3AREADY%3ANWD REQ 21%3A49%3A16.552 -> 0%3B255%3B3%3B0%3B9%3B3134 %3FTSF%3AMSG%3ASEND%2C0-0-255-255%2Cs%3D255%2Cc%3D3%2Ct%3D20%2Cpt%3D0%2Cl%3D0%2Csg%3D0%2Cft%3D0%2Cst%3DOK%3A 21%3A51%3A05.796 -> 0%3B255%3B3%3B0%3B9%3B112458 TSF%3AMSG%3AREAD%2C255-255-0%2Cs%3D255%2Cc%3D3%2Ct%3D3%2Cpt%3D0%2Cl%3D0%2Csg%3D0%3A 21%3A51%3A05.796 -> 255%3B255%3B3%3B0%3B3%3B 21%3A51%3A07.850 -> 0%3B255%3B3%3B0%3B9%3B114516 TSF%3AMSG%3AREAD%2C255-255-0%2Cs%3D255%2Cc%3D3%2Ct%3D3%2Cpt%3D0%2Cl%3D0%2Csg%3D0%3A 21%3A51%3A07.850 -> 255%3B255%3B3%3B0%3B3%3B 21%3A51%3A09.903 -> 0%3B255%3B3%3B0%3B9%3B116568 TSF%3AMSG%3AREAD%2C255-255-0%2Cs%3D255%2Cc%3D3%2Ct%3D3%2Cpt%3D0%2Cl%3D0%2Csg%3D0%3A 21%3A51%3A09.903 -> 255%3B255%3B3%3B0%3B3%3B 21%3A51%3A11.949 -> 0%3B255%3B3%3B0%3B9%3B118621 TSF%3AMSG%3AREAD%2C255-255-0%2Cs%3D255%2Cc%3D3%2Ct%3D3%2Cpt%3D0%2Cl%3D0%2Csg%3D0%3A 21%3A51%3A11.949 -> 255%3B255%3B3%3B0%3B3%3B 21%3A51%3A13.998 -> 0%3B255%3B3%3B0%3B9%3B120675 TSF%3AMSG%3AREAD%2C255-255-0%2Cs%3D255%2Cc%3D3%2Ct%3D3%2Cpt%3D0%2Cl%3D0%2Csg%3D0%3A 21%3A51%3A13.998 -> 255%3B255%3B3%3B0%3B3%3B 21%3A51%3A16.081 -> 0%3B255%3B3%3B0%3B9%3B122733 TSF%3AMSG%3AREAD%2C255-255-0%2Cs%3D255%2Cc%3D3%2Ct%3D3%2Cpt%3D0%2Cl%3D0%2Csg%3D0%3A 21%3A51%3A16.081 -> 255%3B255%3B3%3B0%3B3%3B

      mfalkviddM Offline
      mfalkviddM Offline
      mfalkvidd
      Mod
      wrote on last edited by mfalkvidd
      #2

      Welcome to the forum @rody82
      The gateway is not supposed to answer id request. A controller is needed.

      1 Reply Last reply
      0
      • R Offline
        R Offline
        rody82
        wrote on last edited by
        #3

        Feeling embarrassed not reading page 3 of the intro docs just assuming roles of the components... after your comment I got this up and running within 10mins. Thank you! :)

        mfalkviddM 1 Reply Last reply
        0
        • R rody82

          Feeling embarrassed not reading page 3 of the intro docs just assuming roles of the components... after your comment I got this up and running within 10mins. Thank you! :)

          mfalkviddM Offline
          mfalkviddM Offline
          mfalkvidd
          Mod
          wrote on last edited by
          #4

          Nice work @rody82! Thanks for reporting back.

          1 Reply Last reply
          0
          Reply
          • Reply as topic
          Log in to reply
          • Oldest to Newest
          • Newest to Oldest
          • Most Votes


          25

          Online

          11.7k

          Users

          11.2k

          Topics

          113.1k

          Posts


          Copyright 2025 TBD   |   Forum Guidelines   |   Privacy Policy   |   Terms of Service
          • Login

          • Don't have an account? Register

          • Login or register to search.
          • First post
            Last post
          0
          • MySensors
          • OpenHardware.io
          • Categories
          • Recent
          • Tags
          • Popular