Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you may not be able to execute some actions.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

Connect humidity sensor to OpenHAB

vladimir last edited by

Hello!
Please help to deal with the humidity sensor (http://www.mysensors.org/build/humidity) connection to OpenHAB through MQTT gateway (http://www.mysensors.org/build/mqtt_gateway). I just started to deal with OpenHAB and MySensors. Unfortunately, I do small experience to do everything on their own, and there is no documentation in my language.
Reply Quote 0
1 Reply Last reply
Xander last edited by @vladimir

@vladimir I had the same problem. Very helpful for me is the MQTT-client MQTT.fx. It shows you the messages from your gateway.
See my post: http://forum.mysensors.org/topic/953/how-to-know-the-node-ids-assigned-by-the-mqtt-gateway-to-the-sensors
Reply Quote 0
1 Reply Last reply
vladimir last edited by @Xander

@Xander, thank you for your answer! As it turned out, I have a problem in the gateway. I use a network module ENC28J60, and full of reason to it do not reach the packets, it is not visible on the network. I connect it directly to a computer. Maybe you and repel such a problem?
Reply Quote 0
1 Reply Last reply
Xander last edited by @vladimir

@vladimir No, I use a WIZ5100 module. Search the forum. Many users (try) :-)) to use ENC28J60.
Reply Quote 0
1 Reply Last reply

4
Posts

3153
Views

Suggested Topics

Binary Control Modules , Switches, or Outlets on a Vera Edge
My Project • sensor • • mntlvr

33

0
Votes

33
Posts

13722
Views

@BulldogLowell said: @mntlvr said: And if all six switches are set to gnd the total current would only be 1.5 ma (5volts /20k)x6=.0015 amps I believe. the internal pullup resistors are 20k-50k according to arduino spec. yeah, I know, but if you are underpowered already (the radio....) the extra draw may create an issue... who the heck knows. I'll try on one of mine when I get the chance... your code works, and that's a treat, but now I need to understand why the simpler execution of the same code doesn't seem to cooperate with your rig. weird... you code with pinMode(buttonPin[i], INPUT); exactly same board and USB power supply and same transceiver, here are the results Sending device info...sensor started, id 32 send: 32-32-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1 send: 32-32-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0 read: 0-0-32 s=255,c=3,t=6,pt=0,l=1:I send: 32-32-0-0 s=255,c=3,t=11,pt=0,l=13,st=ok:RemoteControl send: 32-32-0-0 s=255,c=3,t=12,pt=0,l=4,st=ok:1.15 Setting up Pin0 send: 32-32-0-0 s=0,c=0,t=0,pt=0,l=0,st=ok: Setting up Pin1 send: 32-32-0-0 s=1,c=0,t=0,pt=0,l=0,st=ok: Setting up Pin2 send: 32-32-0-0 s=2,c=0,t=0,pt=0,l=0,st=ok: Setting up Pin3 send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=ok: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: Setting up Pin4 send: 32-32-0-0 s=4,c=0,t=0,pt=0,l=0,st=ok: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: Setting up Pin5 send: 0-0-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok: read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch Sensor presentation complete send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:1 Pin 3 changed state... New State: Tripped send: 0-0-0-0 s=0,c=1,t=16,pt=2,l=2,st=ok:1 Pin 0 changed state... New State: Tripped send: 0-0-0-0 s=1,c=1,t=16,pt=2,l=2,st=ok:1 Pin 1 changed state... New State: Tripped send: 0-0-0-0 s=2,c=1,t=16,pt=2,l=2,st=ok:1 Pin 2 changed state... New State: Tripped send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:0 Pin 3 changed state... New State: Not Tripped
Moving sensor from one network to another may cause conflict
Feature Requests • sensor security network • • iliak

1

0
Votes

1
Posts

1286
Views

No one has replied
Problem with connecting serial gateway to openhab2
OpenHAB • openhab serial gateway error • • Marcin Szyda

3

0
Votes

3
Posts

40
Views

@TimO Yes, but without this message: 2020-01-07 16:23:52.050 [INFO ] [rsAbstractConnection$MySensorsWriter] - ACK received for message: 0;0;1;1;2;1
Stabile Controller
Troubleshooting • mqtt openhab serial • • C.r.a.z.y.

9

0
Votes

9
Posts

3652
Views

@celonunes generally raspberry pi with serial usb but also you can see some mqtt logs. Same problem with mac os with serial usb. I also tried rpi uart pins for serial bu there is no logs for it. Maybe someone gives his Openhab dir i can understand better problem isnt related with hardware
💬 Temp_Hum sensors
OpenHardware.io • temperature humidity sensors temp hum • • openhardware.io

1

0
Votes

1
Posts

593
Views

No one has replied
💬 GPS Sensor
Announcements • mysensors sensor gps • • hek

11

1
Votes

11
Posts

2954
Views

@MikeSalmida, No GPS sensor device definition exists for Vera. If you're up to it, create one and add it to the Vera plugin repository.
💬 Sensebender Micro
OpenHardware.io • mysensors temperature humidity atsha204a atmega328 flash • • openhardware.io

116

1
Votes

116
Posts

26554
Views

@mfalkvidd Yes, that’s the one.
💬 EFEKTA Temperature & Humidity mini sensor
OpenHardware.io • temperature battery humidity atmega328 atmega 328p-mu • • openhardware.io

42

0
Votes

42
Posts

5675
Views

@berkseo Thank you for your answer Good continuation on your nice project.

Connect humidity sensor to OpenHAB

Suggested Topics

Binary Control Modules , Switches, or Outlets on a Vera Edge
My Project • sensor • • mntlvr

Moving sensor from one network to another may cause conflict
Feature Requests • sensor security network • • iliak

Problem with connecting serial gateway to openhab2
OpenHAB • openhab serial gateway error • • Marcin Szyda

Stabile Controller
Troubleshooting • mqtt openhab serial • • C.r.a.z.y.

💬 Temp_Hum sensors
OpenHardware.io • temperature humidity sensors temp hum • • openhardware.io

💬 GPS Sensor
Announcements • mysensors sensor gps • • hek

💬 Sensebender Micro
OpenHardware.io • mysensors temperature humidity atsha204a atmega328 flash • • openhardware.io

💬 EFEKTA Temperature & Humidity mini sensor
OpenHardware.io • temperature battery humidity atmega328 atmega 328p-mu • • openhardware.io

54
Online

11.5k
Users

11.1k
Topics

112.7k
Posts

Connect humidity sensor to OpenHAB

Suggested Topics

Binary Control Modules , Switches, or Outlets on a Vera Edge My Project • sensor • • mntlvr

Moving sensor from one network to another may cause conflict Feature Requests • sensor security network • • iliak

Problem with connecting serial gateway to openhab2 OpenHAB • openhab serial gateway error • • Marcin Szyda

Stabile Controller Troubleshooting • mqtt openhab serial • • C.r.a.z.y.

💬 Temp_Hum sensors OpenHardware.io • temperature humidity sensors temp hum • • openhardware.io

💬 GPS Sensor Announcements • mysensors sensor gps • • hek

💬 Sensebender Micro OpenHardware.io • mysensors temperature humidity atsha204a atmega328 flash • • openhardware.io

💬 EFEKTA Temperature & Humidity mini sensor OpenHardware.io • temperature battery humidity atmega328 atmega 328p-mu • • openhardware.io

54Online

11.5kUsers

11.1kTopics

112.7kPosts

Binary Control Modules , Switches, or Outlets on a Vera Edge
My Project • sensor • • mntlvr

Moving sensor from one network to another may cause conflict
Feature Requests • sensor security network • • iliak

Problem with connecting serial gateway to openhab2
OpenHAB • openhab serial gateway error • • Marcin Szyda

Stabile Controller
Troubleshooting • mqtt openhab serial • • C.r.a.z.y.

💬 Temp_Hum sensors
OpenHardware.io • temperature humidity sensors temp hum • • openhardware.io

💬 GPS Sensor
Announcements • mysensors sensor gps • • hek

💬 Sensebender Micro
OpenHardware.io • mysensors temperature humidity atsha204a atmega328 flash • • openhardware.io

💬 EFEKTA Temperature & Humidity mini sensor
OpenHardware.io • temperature battery humidity atmega328 atmega 328p-mu • • openhardware.io

54
Online

11.5k
Users

11.1k
Topics

112.7k
Posts