Swap node ID to another arduino
-
This weekend I tore of the A4 / A5 pads on an pro mini.....This time I will be soldering pins on first !!!!!
I am in the process of building a new board but want to transfer the node ID from the old node to the new one - so I don't have to reprogram anything in Domoticz / Node red.
Can I just use define MY_NODE_ID ??
Thanks
-
@grumpazoid yes that will work.
Domoticz also has a Replace feature, where you can associate a new device with history from an existing device.
-
@mfalkvidd Many thanks.
I didn't know about the replace feature....I will check it out.
3 out of 3
Suggested Topics
-
Day 1 - Status report
Announcements • 23 Mar 2014, 22:45 • hek 24 Mar 2014, 20:12 -
Arduino nano and Uno in same My sensors network with NRF24L01+
Troubleshooting • 26 Jul 2024, 10:30 • DIY89 27 Aug 2024, 09:59 -
Can not compile MySensors on esp8266
Troubleshooting • 24 Aug 2024, 15:35 • TheoL 29 Aug 2024, 20:47 -
Suddenly a Sensor is Missing, not the whole Node. (RPI Eth Gateway, HA)
Troubleshooting • 3 Jul 2024, 07:20 • se-O-matic 15 Jul 2024, 08:45 -
Extraneous info in Debug log
Troubleshooting • 28 Jun 2024, 22:42 • Gibber 28 Jun 2024, 22:42 -
Raspberry Pi 5: invalid GPIO 9
Troubleshooting • 27 Aug 2024, 13:20 • igo 27 Aug 2024, 13:20