MQTT & MySensors persistant file

[martim]

Hi,

I have an existing mysensors network with many nodes. I would like to work with hassio (beginner). I have added mysensors and with the mqtt gateway. However, I see that the nodes need un update because of a special way sending the S_TYPE and V_TYPE. This would require a lot of work.

Is there not a different way? Can I not specify all the nodes into the persistent file? Does someone have an example of this file?

I do get now an error for example that node 17 is not recognized.

Thanks and keep safe for the Coronavirus

[electrik]

Here you are. I stripped many devices, if you need more let me know

{
    "4": {
        "sensor_id": 4,
        "children": {
            "4": {
                "id": 4,
                "type": 4,
                "description": "",
                "values": {
                    "3": "71",
                    "2": "0"
                }
            },
            "5": {
                "id": 5,
                "type": 4,
                "description": "",
                "values": {
                    "3": "71",
                    "2": "1"
                }
            },
            "6": {
                "id": 6,
                "type": 4,
                "description": "",
                "values": {
                    "48": "927"
                }
            },
            "3": {
                "id": 3,
                "type": 4,
                "description": "",
                "values": {
                    "3": "71",
                    "2": "0"
                }
            },
            "15": {
                "id": 15,
                "type": 3,
                "description": "",
                "values": {
                    "2": "1"
                }
            }
        },
        "type": 18,
        "sketch_name": "Dimmer bank",
        "sketch_version": "3.0",
        "battery_level": 0,
        "protocol_version": "2.4.0-alpha",
        "heartbeat": 0
    }
}

[martim]

@electrik Thanks. That will do I think. Now hopefully this will work