serial gateway
-
hi, i start to build home automation system based on home assistant that installed on raspberry pi 3. my gateway is serial using arduino nano and nrf24l01. what should i do now? how can i configure the gateway to work with home assistant?
thank you. -
hi, i start to build home automation system based on home assistant that installed on raspberry pi 3. my gateway is serial using arduino nano and nrf24l01. what should i do now? how can i configure the gateway to work with home assistant?
thank you.Welcome @Asaf-Frige
Please follow the integration guide for MySensors in the Home Assistant docs.
It includes all the information you need to connect a serial gateway to Home Assistant, including a sample configuration and sketch. If you have any open questions afterwards, feel free to ask.
-
i still don't understand how to make the right configuration for me...
-
You don't have to configure the gateway, just tell Home assistant the gateway is there.
Did you follow the instructions in the link @BearWithBeard mentioned?Please note the nodes you use have to follow the presentation guide lines, else HA won't detect them automatically.
https://www.home-assistant.io/integrations/mysensors/#presentation
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login