MySensors + Irrigation controller sketch with Jeedom -> passing V_Var1, V_Var2 and V_Var3 at node request
-
Hi all,
I'm using MySensors since 2017, and recently I was trying to use the irrigation example (https://www.mysensors.org/build/irrigation) but faced a problem which I'm unable to overcome.
The sketch ask every 5 minutes for the V_VAR1 V_VAR2 and V_VAR3 for configuring times and zone names.
I arrived to send manually these values through jeedom (using the proper type : https://www.mysensors.org/download/serial_api_20#set,-req) but they are changed to 0 as the controller don't send any value at its request.
Do you know how to set these values to the MySensors items in order to provide the values at the node request?Thanks
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login