💬 MyGateway
-
-
@Gerator - Nice project! How did you solve dual SPI channels for ethernet and RFM radio?
Ethernet gateway using Arduino UNO with Ethernet shield stacked JP1 should be 1-2 and JP2 2-3.
-
RFM69 and Ethernet shield share SPI bus, each one with its own CS line. Ethernet shield uses pin 10 so JP1 should use pin 6 for the radio. Issues sharing SPI bus seems to be due to bad SEN line handling as described here. The official Arduino ethernet shield suffered from this, but most commonly used clones work ok. Shields including 74LVC14 as in the pic should work ok.
-
This project is very cool!
I received my pcbs to try it this morning , i'll tell you if i can make it work
-
Works perfectly ! So many thanks to @Gerator
-
@hlehoux glad to hear that!!
4 out of 6
Suggested Topics
-
Gateway USB and Gateway Ethernet
General Discussion • 23 Aug 2020, 07:36 • Daniel RUIZ9 15 Nov 2020, 20:11 -
Openhab 2 Mysensors smart chicken coop
My Project • 1 Mar 2017, 02:08 • Ticupolu 8 Mar 2017, 15:48 -
💬 RFM69 Livolo 2 channels 1 way EU switch(VL-C700X-1 Ver: B8)
OpenHardware.io • 6 Jan 2017, 10:41 • openhardware.io 14 Jul 2018, 08:01 -
iBoard - Ethernet Gateway - Check Wires
Troubleshooting • 13 Feb 2015, 20:38 • tbully 16 Feb 2015, 17:22 -
Is there a Gateway connection timeout?
General Discussion • 6 Feb 2022, 11:55 • A3V 6 Feb 2022, 18:48 -
💬 Mysensors 2.0 ethernet gateway (W5100) build.
OpenHardware.io • 1 Sept 2016, 18:35 • openhardware.io 5 Feb 2018, 07:05 -
💬 Homini AC Powered Relay (2) Module
OpenHardware.io • 27 Feb 2017, 18:03 • openhardware.io 12 Mar 2017, 15:54
