💬 MyGateway
-
-
@Gerator - Nice project! How did you solve dual SPI channels for ethernet and RFM radio?
Ethernet gateway using Arduino UNO with Ethernet shield stacked JP1 should be 1-2 and JP2 2-3.
-
RFM69 and Ethernet shield share SPI bus, each one with its own CS line. Ethernet shield uses pin 10 so JP1 should use pin 6 for the radio. Issues sharing SPI bus seems to be due to bad SEN line handling as described here. The official Arduino ethernet shield suffered from this, but most commonly used clones work ok. Shields including 74LVC14 as in the pic should work ok.
-
This project is very cool!
I received my pcbs to try it this morning , i'll tell you if i can make it work
-
Works perfectly ! So many thanks to @Gerator
-
@hlehoux glad to hear that!!
3 out of 6
Suggested Topics
-
💬 USB RF Gateway
OpenHardware.io • 6 Sept 2019, 11:44 • openhardware.io 6 Feb 2020, 11:36 -
💬 MySensors Battery node 2xAAA for SI/BME/SHT
OpenHardware.io • 19 Apr 2020, 12:11 • openhardware.io 19 Apr 2020, 12:11 -
trouble in ENC28J60 GW
Troubleshooting • 21 Jul 2014, 08:00 • mitekg 22 Jul 2014, 17:46 -
all the gear, no idea
General Discussion • 5 Mar 2015, 17:51 • baldsi 2 Apr 2015, 07:28 -
SCT-013-000 Calibration Value
General Discussion • 23 Sept 2021, 17:07 • Junior Ximenes 23 Sept 2021, 17:07 -
Boards manager package does not install Sensebender gateway
Troubleshooting • 8 Aug 2017, 20:52 • billgoolsby 8 Aug 2017, 20:52 -
Do we have any option to enable queue in Gateway node?
General Discussion • 7 Sept 2018, 07:12 • jkandasa 7 Sept 2018, 08:29 -
pimatic-mysensors controller plugin
pimatic • 9 Jan 2015, 10:21 • Dheeraj 26 Jul 2019, 12:25
