RFM69 - Get 433Mhz RF RSSI present in the air.
-
Hello, I´m Eugenio Mercol from Argentina.
I´m trying to do a simple project, but, I cant find the way.
Project: 433Mhz RF RSSI meter
Hardware: RFM69 connected to Arduino UNO using 5v to 3.3V level shifter between them (connections checked, are OK)
Objetive: Read the RSSI present in the air, transmitted from 433Mhz Radio tansmitter like, for example, BAOFENG uv-5r
Explanation: I need to make a measurement of the 433Mhz RF signal level present in the air and show it by serial monitor.- Send or recieve valid radio packet is not necesary
- Only receive mode will be use
- "No valid" or "valid" radio packet is the same, because I just need the RSSI in real time, all the time
I triyed to use all libraries and examples that I find on internet, too many, but all them needs to get a valid radio packet to show the RSSI value.
Libraries and examples used: HopeRF, HopeRFLib, RadioHeadMaster, RFM69_PowerLab, and only show the RSSI when a valid radio packet is received.Well, I can´t resolve it by my self, could you help me?
Thank you!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login