Irrigation Controller MQTT Status Requests



  • Re: Irrigation Controller (up to 16 valves with Shift Registers)

    Hi All! First post, long time creeper! I recently built the irrigation controller and paired it with my Openhab instance. It's working great!

    I used the MQTT gateway and binding.

    My question is, I get notices like the below on my MQTT broker every few minutes scrolling thru the different nodes on the gateway.

    I am thinking it is looking for the status of the VAR's but not sure why it's sending this out so frequently. I don't have anything programmed in openhab to respond and don't know if I need to or not? It's working great as is just wondering if I am missing something by not having openhab respond to these requests:

    Thanks for any advice!!

    mygateway1-out/1/5/2/0/24 (null)
    mygateway1-out/1/5/2/0/24 (null)
    mygateway1-out/1/5/2/0/24 (null)
    mygateway1-out/1/5/2/0/24 (null)
    mygateway1-out/1/5/2/0/24 (null)
    mygateway1-out/1/5/2/0/24 (null)
    mygateway1-out/1/5/2/0/24 (null)
    mygateway1-out/1/5/2/0/24 (null)
    mygateway1-out/1/5/2/0/25 (null)
    mygateway1-out/1/5/2/0/25 (null)
    mygateway1-out/1/5/2/0/25 (null)
    mygateway1-out/1/5/2/0/25 (null)
    mygateway1-out/1/5/2/0/25 (null)
    mygateway1-out/1/5/2/0/25 (null)
    mygateway1-out/1/5/2/0/25 (null)
    mygateway1-out/1/5/2/0/26 (null)
    mygateway1-out/1/5/2/0/26 (null)
    mygateway1-out/1/5/2/0/26 (null)
    mygateway1-out/1/5/2/0/26 (null)
    mygateway1-out/1/5/2/0/26 (null)
    mygateway1-out/1/5/2/0/26 (null)



  • Any thoughts on this? I still haven't been able to figure out if I am doing something wrong or if it's normal to have this much activity over MQTT

    Thanks!



  • Still hoping for guidance. Thanks much!


Log in to reply
 

Suggested Topics

  • 8
  • 2
  • 90
  • 3
  • 1
  • 1

1
Online

11.2k
Users

11.1k
Topics

112.5k
Posts