Send in Power Level At Sensor Start - 1.5 Question
-
Hello All -
In 1.4, I used to sometimes use the following to setup my sensors:
gw.begin(incomingMessage, AUTO, false, AUTO, RF24_PA_LOW);However, I see that the new 1.5 MySensor.H file no longer supports that many parameters.
Am I correct that this ability has been removed? Any suggestions on how to do this on 1.5 if needed?
-
Hello All -
In 1.4, I used to sometimes use the following to setup my sensors:
gw.begin(incomingMessage, AUTO, false, AUTO, RF24_PA_LOW);However, I see that the new 1.5 MySensor.H file no longer supports that many parameters.
Am I correct that this ability has been removed? Any suggestions on how to do this on 1.5 if needed?
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login