No softspi support for RFM69

[mrmin24]

I managed to get the softspi working and will upload to Git soon

[TD22057]

@mrmin24 Have you had a chance to upload this yet?

FYI - It looks like the RFM69 library from lowpowerlabs might not have have been updated. Here are some threads about using an RFM69 w/ an ethernet shield over there:

https://lowpowerlab.com/forum/index.php/topic,838.0
https://lowpowerlab.com/forum/index.php?topic=557.0
https://lowpowerlab.com/forum/index.php?topic=201.15

I'm just starting to work my way through these now but if you've already got it working, that would be great. I'm very curious to see if MqttClientGateway + digital signing + RFM69 will compile down small enough to fit.

[gieemek]

I was able to implement the module RFM69 on a soft spi (RFM69 only for now). It is not very complicated. If anyone is interested, I can post a description how to do this, or I can send the ready files. Unfortunately, I did not use GitHub yet and not posted files there - I'll try to do it as soon as I can.
I use modules RFM69W and RFM69HW as radio modules. As the gate I use MySensors MQTTgateway (Arduino Mega 2560 R3 + ethernet shield + RFM69HW). Everything works pretty well and I can build an entire network of sensors based on MySensors libraries.

[TD22057]

Thanks. Chat message sent w/ my email to get the files. I won't have time to mess with the radios until next week but then I can set up a git pull request with your changes if you like. I decided to spend the $7 and get a Mega for my gateway and duplicate your set up (except w/ the MqttClientGateway). Did you apply the ethernet shield reset fix to the mega+ethernet? More info here: http://forum.mysensors.org/topic/1021/security-introducing-signing-support-to-mysensors/156

[gieemek]

I'm using Arduino Mega in my gate because I want to add LCD display in the future . Uno has too little ram to do it.
Now when I compile MQTTgateway sketch with my RFM69 soft spi library in the arduino ide it takes 18 838 bytes, variables 882 bytes, so this should be fit for Uno.

[gieemek]

I had no problems with resetting the gate so far, but I must point out, if I have this problem.

[TD22057]

Nice. I bought a Mega with an LCD touch screen too. I also thought it would be interesting to have a gateway that can show you messages it receives on a screen and other information.

[gieemek]

OK, finally I put my library and files at GitHub repositories. You can find it at https://github.com/gieemek

[gieemek]

@TD22057 said:

Thanks. Chat message sent w/ my email to get the files. I won't have time to mess with the radios until next week but then I can set up a git pull request with your changes if you like. I decided to spend the $7 and get a Mega for my gateway and duplicate your set up (except w/ the MqttClientGateway). Did you apply the ethernet shield reset fix to the mega+ethernet? More info here: http://forum.mysensors.org/topic/1021/security-introducing-signing-support-to-mysensors/156

I don't need to reset my gateway after power lost (Arduino Mega 2560 + ethernet shield + RFM69HW radio) - everythng working good.

[gieemek]

@gieemek said:

I'm using Arduino Mega in my gate because I want to add LCD display in the future . Uno has too little ram to do it.
Now when I compile MQTTgateway sketch with my RFM69 soft spi library in the arduino ide it takes 18 838 bytes, variables 882 bytes, so this should be fit for Uno.

Ooops, I have made a mistake. My MQTTGateway.ino sketch with RFM_softSPI library compiles to 28 474 bytes, variables 1 003 bytes. Sorry for my earlier notes.

[TD22057]

Thanks! The connection diagrams are a nice touch. I'll take a look and try it out (probably w/ the MQTTClientGateway) as soon as I can.

How hard would it be to make a version of RFM69 that would support soft and hard spi? I haven't run diff's yet to see what your modifications were but it would be nice if this was a fork of the LowPowerLap library so Felix could fold back in to his version code. Having two versions of the same file that I have to switch between might get confusing in the future.

[gieemek]

Modifications were easier than I expected, only that I am successfull (I'm not a programmer).
For now, the program did not switching between soft and hard SPI and I fail to realize it fast - really frequently change the file is uncomfortable.
I want to send my library to LowPowerLab to check it.
If you are interested in further modification of this library, I can send you by mail a list of changes I made.

[korttoma]

@gieemek
@TD22057
Any chance that you ore someone else has adapted this RFM69 SoftSPI solution to the MySensors 2.0 Library version?

[gieemek]

I modified MyConfig.h file and RFM69 driver to allow you build gateway (ethernet or MQTT) with W5100 ethernet and RFM69 radio modules using SoftSPI bus. You can find it at: https://github.com/gieemek/RFM69_softSPI-for-MySensors-2.1.1