Sensebender Micro not work



  • Hello everybody. I have a problem, do not want to work the boards.He writes Снимок экрана (7).png



  • things to check / do

    1. verify radio is good
    2. verify radio is connected correctly
    3. if header soldered in, verify nothing is touching / solder work is clean/good
    4. upgrade to arduino 1.6.5
    5. verify mysensors is library v1.5
    6. if you set up a gateway recently, verify you turned softspi back off and didn't leave it on.

    your issue likely lies in one of those areas.


Log in to reply
 

Suggested Topics

0
Online

11.2k
Users

11.1k
Topics

112.5k
Posts