Temperature Sensor problem

Heinz

Yep I agree, looks like wrong baudrate.

vampircik

Arduino: 1.6.3 (Windows 8), Плата"Arduino Pro or Pro Mini, ATmega328 (3.3V, 8 MHz)"

Изменена опция сборки, пересобираем все

sketch_jul26d.ino:2:3: error: invalid preprocessing directive #\

sketch_jul26d.ino:3:3: error: invalid preprocessing directive #\

sketch_jul26d.ino:4:3: error: invalid preprocessing directive #\

sketch_jul26d.ino:5:3: error: invalid preprocessing directive #\

sketch_jul26d.ino:7:3: error: invalid preprocessing directive #\

sketch_jul26d.ino:8:4: error: invalid preprocessing directive #\

sketch_jul26d.ino:9:1: error: stray '' in program

sketch_jul26d.ino:10:1: error: stray '' in program

sketch_jul26d.ino:11:1: error: stray '' in program

sketch_jul26d.ino:13:1: error: stray '' in program

sketch_jul26d.ino:15:1: error: stray '' in program

sketch_jul26d.ino:16:1: error: stray '' in program

sketch_jul26d.ino:20:1: error: stray '' in program

sketch_jul26d.ino:35:3: error: stray '' in program

sketch_jul26d.ino:36:6: error: stray '' in program

sketch_jul26d.ino:41:1: error: stray '' in program

sketch_jul26d.ino:50:3: error: stray '' in program

sketch_jul26d.ino:53:5: error: stray '' in program

sketch_jul26d.ino:56:5: error: stray '' in program

sketch_jul26d.ino:59:7: error: stray '' in program

sketch_jul26d.ino:60:7: error: stray '' in program

sketch_jul26d.ino:9:2: error: 'u0437' does not name a type

sketch_jul26d.ino:10:1: error: 'Wire' does not name a type

sketch_jul26d.ino:11:1: error: 'DallasTemperature' does not name a type

sketch_jul26d.ino:12:1: error: 'MySensor' does not name a type

sketch_jul26d.ino:13:2: error: 'u043f' does not name a type

sketch_jul26d.ino:14:2: error: 'INT' does not name a type

sketch_jul26d.ino:15:2: error: 'u043b' does not name a type

sketch_jul26d.ino:16:2: error: 'u043b' does not name a type

sketch_jul26d.ino:18:1: error: 'MyMessage' does not name a type

sketch_jul26d.ino:20:2: error: 'u043d' does not name a type

sketch_jul26d.ino:41:2: error: 'u043d' does not name a type

Ошибка компиляции.

Это сообщение будет содержать больше информации чем
"Отображать вывод во время компиляции"
включено в Файл > Настройки

vampircik

vampircik

@BulldogLowell said:

// Example sketch showing how to send in OneWire temperature readings
#include <MySensor.h>
#include <SPI.h>
#include <DallasTemperature.h>
#include <OneWire.h>

#define ONE_WIRE_BUS 3 // Pin where dallase sensor is connected
#define MAX_ATTACHED_DS18B20 16
unsigned long SLEEP_TIME = 30000; // Sleep time between reads (in milliseconds)
OneWire oneWire(ONE_WIRE_BUS);
DallasTemperature sensors(&oneWire);
MySensor gw;
float lastTemperature[MAX_ATTACHED_DS18B20];
int numSensors=0;
boolean receivedConfig = false;
boolean metric = true;
// Initialize temperature message
MyMessage msg(0,V_TEMP);

void setup()
{
// Startup OneWire
sensors.begin();

// Startup and initialize MySensors library. Set callback for incoming messages.
gw.begin();

// Send the sketch version information to the gateway and Controller
gw.sendSketchInfo("Temperature Sensor", "1.0");

// Fetch the number of attached temperature sensors
numSensors = sensors.getDeviceCount();

// Present all sensors to controller
for (int i=0; i<numSensors && i<MAX_ATTACHED_DS18B20; i++) {
gw.present(i, S_TEMP);
}
}

void loop()
{
// Process incoming messages (like config from server)
gw.process();

// Fetch temperatures from Dallas sensors
sensors.requestTemperatures();

// Read temperatures and send them to controller
for (int i=0; i<numSensors && i<MAX_ATTACHED_DS18B20; i++) {
// Fetch and round temperature to one decimal
float temperature = static_cast<float>(static_cast<int>((gw.getConfig().isMetric?sensors.getTempCByIndex(i):sensors.getTempFByIndex(i)) * 10.)) / 10.;

// Only send data if temperature has changed and no error
if (lastTemperature[i] != temperature && temperature != -127.00) {

  // Send in the new temperature
  gw.send(msg.setSensor(i).set(temperature,1));
  lastTemperature[i]=temperature;
}
}
gw.sleep(SLEEP_TIME);
}

Снимок экрана (22).png

BulldogLowell

"Check wires" error when you don't have the NRF radio connected properly.

vampircik

I connected properly checked.

sundberg84

I have seen "check wires" a 100 times and every time it is because I missed in the wiring.

Double and tripple check wiring in both arduino and radio side.
If its correct, try another radio, change wires or even try another arduino.

Good luck.

hek

And make sure you haven't enabled SOFTSPI earlier and forgot to change it back.

vinzouille

Hi,

I had the check wires problem and this topic was helpful thanks a lot :)
Now I don't have this error message anymore but I don't have any message at all, so my question is am I supposed to have any message while running my temperature sensor on serial monitor ?

vinzouille

I found the solution this was my NRF that didn't work

Temperature Sensor problem

10

11.7k

11.2k

113.1k