Over the air (OTA) bootloading update tutorial?

[scalz]

Dualoptiboot use spi protocol for eeprom. So you can't. you would have to rewrite the code to use i2c protocol.
I don't know if there are cheap spi alternative and I have not looked at ali, I buy mine at mouser.

[Suresh Mali]

@scalz Thanks buddy :thumbsup: . Probably I would have to keep hunting for SPI EEPROMs iguess.:sweat:

[ahmedadelhosni]

@Suresh-Mali I have the same problem. Only I2C IC is available in my country :(
Looks like we have to hack the code. I will inform you when I reach this phase in my project.

[scalz]

@ahmedadelhosni, @Suresh-Mali : I don't know if you have a soldering iron ?? But you could use this ref : w25x40clsnig . This is the one used on moteino from lowpowerlab (they created Dualoptiboot).
You can find this flash ic on aliexpress. It is cheap but ic only, no eval board..
Then you can use this :
https://www.openhardware.io/view/18/OTA-and-Authentication-Evaluation-Board

I hope it helps. I have not tried these aliexpress flash but it should work. I hope ;) I will order some to see too.

Few months ago, I made this french tut about OTA and dualoptiboot for jeedom users. I never had time to translate it. I will see when I will be able, but in case it can help, with some google translate, there are some pics too so maybe...
https://www.jeedom.com/forum/viewtopic.php?f=35&t=9539

[Suresh Mali]

@ahmedadelhosni Great, do let us know once you have something.

[Suresh Mali]

@ahmedadelhosni Hey, I found this article. Seems like the guy has used i2c for remote flash. I was not able to extactly understand whats going on, maybe you can help.
http://www.rotwang.co.uk/projects/bootloader.html

[scalz]

nice catch ;) yes it should work with some tests and code changes in mysensors lib to write into the i2c flash instead of spi flash...

[Suresh Mali]

@scalz , Thanks:smiley:
I am not a Device Programmer, I am counting on some one to hack and make it possible. Hope somebody puts in efforts that will help everybody like me.

[scalz]

@Suresh-Mali : yep, I understand :confused: unfortunately, I have no time, even if it is maybe not the biggest thing, tests take time..there are so much things I would like to do! Do you have a soldering iron??? What I have showed to you in previous post don't need big soldering skills...

[Suresh Mali]

@scalz Oh yes, soldering is not an issue. I have rework station and I am proficient with soldering Through Hole and SMD components.
Its about getting the EEPROMs.

Buying from Ali would be my last resort. I am hunting for this chip in other parts of India. I should have an answer by day end, If I dont get them then I'll order from Ali. Waiting is the worst part of ordering from Ali. I had Order ATSHA204 on 12th Dec and still waiting.:disappointed:

[Suresh Mali]

Hey Guys, I managed to find a EEPROM chip from Bangalore, India. Its 25LC512, priced at Rs.65(~$1). I hope it works. I should get it next 2days. It has the same footprint as one used in SenseBenderMicro. Will try once I have them and update.

[ahmedadelhosni]

nice catch for the I2C bootloader.
Keep us updated please of your progress. I can't actually start this phase now as I am working on other things at the moment.
Good luck.

[Suresh Mali]

This post is deleted!

[mfalkvidd]

@Suresh-Mali please do not post the same question in more than one thread. Answer is available in http://forum.mysensors.org/topic/3060/home-made-ota-and-authentication-breakout-board/2

[gepd]

There is several alternatives in aliexpress to the memory @Anticimex posted above, SPI interface, same pin distribution, only change the memory capacity and voltage input. (and good prices)