[SOLVED] msg.getBool() issue related to string length

[BartE]

Playing around with my RGB controller, the module sometimes gets in a state in which i can not power off the lights.

After sending a number of V_RGB message i'm sending a V_STATUS message with payload "0" which is not correct decoded by getBool()

This is the logging:

read: 0-0-9 s=1,c=1,t=2,pt=0,l=1,sg=0:0
send: 9-9-0-0 s=1,c=1,t=2,pt=0,l=1,sg=0,st=ok:0
Message: 2
Payload: 
  getBool: 1
  getString: 01EBC6D600r
  getInt: 1
  getByte: 1

Generated by this peace of code

Serial.print("Message: ");
Serial.println(message.type);

Serial.println("Payload: ");
Serial.print("  getBool: ");
Serial.println(message.getBool());
Serial.print("  getString: ");
Serial.println(message.getString());
Serial.print("  getInt: ");
Serial.println(message.getInt());
Serial.print("  getByte: ");
Serial.println(message.getByte());

It look that the payload length is not correctly used when decoding the message but correctly is displayed in the debug string
I'm using MySensors version 1.5.3

[Yveaux]

@BartE Update to 1.5.4. This is why 1.5.4 was released today

[hek]

Could you test the same on 1.5.4?
https://github.com/mysensors/Arduino/releases/tag/1.5.4

We had a regression that recently was fixed by @Anticimex .

Edit: Damn, I didn't scroll down all the way to @Yveaux answer..

[BartE]

@Yveaux and @hek bingo! That line in v 1.5.4 does solve the issue.
Thx a lot for the support.

read: 0-0-9 s=1,c=1,t=2,pt=0,l=1,sg=0:0
send: 9-9-0-0 s=1,c=1,t=2,pt=0,l=1,sg=0,st=ok:0
Message: 2
Payload: 
  getBool: 0
  getString: 0
  getInt: 0
  getByte: 0
OFF: Switch colors off