RF24_PA_LEVEL and options
-
I have been looking in MyConfig.h for the different levels to set for RF24_PA_LEVEL and RF24_PA_LEVEL_GW, but could not find it in the documentation. Only RF24_PA_MAX and RF24_PA_LOW was shown as options.
In the forum I found that all these options can be used - RF24_PA_MIN, RF24_PA_LOW, RF24_PA_HIGH or RF24_PA_MAX.
I suggest that these options are added as remarks in MyConfig.h.
-
I was just yesterday testing a system I'm going to install on the summer cottage, and noticed that I get hardly 2 meters range. Then I noticed the sketch has 'RF24_PA_LOW' by default.
Is it OK/safe etc. to use the highest PA level for the PCB antenna versions of nRF24 ?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login