Water flowsensor
-
Hi,
I'm new in mysensors/arduino. I would like to monitor the water usage with 5 flowsensors like the fs400a. It would all be connected to my domoticz setup,if possible by Ethernet.Because I'm new in this, I do not know how where to start. What do I need? An uno r3 and Ethernet shield?
-
Welcome to MySensors @thomas2000 !
You should probably start with the getting started guide -
Thank you for your post. I also found this http://www.seeedstudio.com/forum/viewtopic.php?f=10&t=989&sid=bbe4d6f1ab9f050788e5fa5b41b46069
Can you check my picklist:
Uno r3
W5100 Ethernet shield
Breadboard
Resistors
Some cables
FlowmetersCan I split the 5v from the uno r3 to the flowmeters?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login