Sensor reading incorrect data from the controller
-
I have OpenHAB on Rpi as the controller (serial) and few sensors. All the sensors require simplex communication work perfectly. But my (only one) relay is not responding at all. When I switch it On, I get 'ffffff' and when Off, it's '000000'.
Testing with MYSController works fine.
I'm using Arduino IDE ver 1.6.7 and MySensors ver 1.5.4. Please help. Thank you.
Serial output below.
read: 0-0-3 s=1,c=1,t=2,pt=0,l=6,sg=0:ffffff Incoming change for sensor:1, New status: 0 read: 0-0-3 s=1,c=1,t=2,pt=0,l=6,sg=0:000000 Incoming change for sensor:1, New status: 0
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login