How to change the SerialGateway nodeID?

[Magic W]

The default serial Gateway ID is 0, so,how to change the gateway ID?

[mfalkvidd]

Changing the id of the gateway is not supported. Perhaps there is another solution to the problem you are trying to solve. Could you describe what you want to do?

[Magic W]

Thanks for replay!
I read the doc,just can‘t find how to modified the gateway id.If in the network,there are two gateway,What will it be?

[Yveaux]

@Magic-W there can be only one gateway per network. You can create 2 separate networks with 2 gateways (put each on a different channel to prevent interference).
Why do you need 2 gateways?