MySensors Communication Error

[yoram]

VeraPlus UI7 version: 1.7.2044
MySensors Gateway: ESP8266 - NodeMCU 0.9
Library 2.0

For some reason the Vera is unable to communicate with the gateway

1. I can see proper information when connected to the gateway via MYSController, no radio problem
2. I can ping the gateway IP address from my laptop
3. I can connect to the gateway via telnet to IPADDRESS:5003

When I logged in to the VeraPlus console

1. I cannot ping the gateway IP, there is no reply.
2. I can ping from the gateway to other devices in my network
3. The MAC address of the gateway is resolved in the controller (arp -a)

Vera is reporting
MySensors plugin : Cannot send command - communications error

Any idea?

[Yveaux]

@yoram Enable #define MY_DEBUG in the gateway sketch and upload gateway again.
Connect NodeMCU to a PC and report back serial data output by the gateway.

[yoram]

I see no problem on this side, I even rebooted one node and it can be seeing

2016-08-08 20:12:15	Message	0;255;3;0;9;Starting gateway (RNNGE-, 2.0.0)
2016-08-08 20:12:15	Message	
0;255;3;0;9;TSM:INIT
0;255;3;0;9;TSM:RADIO:OK
0;255;3;0;9;TSM:GW MODE
0;255;3;0;9;TSM:READY
0;255;3;0;9;-^^--
0;255;3;0;9;Yoram:
0;255;3;0;9;Static IP:
10.100.102.111
scandone
f 0, scandone
state: 0 -> 2 (b
2016-08-08 20:12:15	Message	0)
state: 2 -> 3 (0)
state: 3 -> 5 (10)
add 0
aid 1
cnt 

connected with ShechoriHome, channel 11
ip:10.100.102.111,mask:255.255.255.0,gw:10.100.102.1
2016-08-08 20:12:15	Message	.IP: 10.100.102.111
0;255;3;0;9;No regis
2016-08-08 20:12:15	Message	tration required
0;255;3;0;9;Init complete, id=0, parent=0, distance=0, registration=1
2016-08-08 20:12:25	Message	pm open,type:2 0
2016-08-08 20:12:45	Message	0;255;3;0;9;TSP:MSG:READ 20-20-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
0;255;3;0;9;TSP:MSG:BC
0;255;3;0;9;TSP:MSG:FPAR REQ (sender=20)
0;255;3;0;9;TSP:CHKUPL:OK
0;255;3;0;9;TSP:MSG:GWL OK
2016-08-08 20:12:46	Message	0;255;3;0;9;TSP:MSG:SEND 0-0-20-20 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=ok:0
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=255,c=3,t=24,pt=1,l=1,sg=0:1
0;255;3;0;9;TSP:MSG:PINGED (ID=1, hops=1)
0;255;3;0;9;TSP:MSG:SEND 0-0-1-1 s=255,c=3,t=25,pt=1,l=1,sg=0,ft=0,st=ok:1
2016-08-08 20:12:48	Message	0;255;3;0;9;TSP:MSG:READ 20-20-0 s=255,c=3,t=24,pt=1,l=1,sg=0:1
0;255;3;0;9;TSP:MSG:PINGED (ID=20, hops=1)
0;255;3;0;9;TSP:MSG:SEND 0-0-20-20 s=255,c=3,t=25,pt=1,l=1,sg=0,ft=0,st=ok:1
0;255;3;0;9;TSP:MSG:READ 20-20-0 s=255,c=3,t=15,pt=6,l=2,sg=0:0100
0;255;3;0;9;TSP:MSG:SEND 0-0-20-20 s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=ok:0100
0;255;3;0;9;TSP:MSG:READ 20-20-0 s=255,c=0,t=17,pt=0,l=5,sg=0:2.0.0
0;255;3;0;9;TSP:MSG:READ 20-20-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0
2016-08-08 20:12:50	Message	0;255;3;0;9;TSP:MSG:READ 20-20-0 s=255,c=3,t=11,pt=0,l=19,sg=0:Water Leakage w Bat
0;255;3;0;9;TSP:MSG:READ 20-20-0 s=255,c=3,t=12,pt=0,l=3,sg=0:1.0
0;255;3;0;9;TSP:MSG:READ 20-20-0 s=0,c=0,t=32,pt=0,l=0,sg=0:
0;255;3;0;9;TSP:MSG:READ 20-20-0 s=1,c=0,t=23,pt=0,l=0,sg=0:
0;255;3;0;9;TSP:MSG:READ 20-20-0 s=255,c=3,t=26,pt=1,l=1,sg=0:2
0;255;3;0;9;TSP:MSG:SEND 0-0-20-20 s=255,c=3,t=27,pt=1,l=1,sg=0,ft=0,st=ok:1
0;255;3;0;9;TSP:MSG:READ 20-20-0 s=1,c=1,t=38,pt=7,l=5,sg=0:3.178
0;255;3;0;9;TSP:MSG:READ 20-20-0 s=255,c=3,t=0,pt=1,l=1,sg=0:100
0;255;3;0;9;TSP:MSG:READ 20-20-0 s=0,c=2,t=15,pt=0,l=0,sg=0:

[Yveaux]

@yoram apart from all the "2016-08-08 20:12:50 Message" texts (does your terminal program add them?) output looks OK.
I don't have a Vera, so can't help you any further...