Can not compile serial gateway on codebender or ide

[flopp]

i think you have to correct how the text i shown here, now it looks very strange.
When you edit you can see how it will look like on the right side(if you use a computer)

Is you libraries installed on drive X?

[mugs]

I had just copied the messages strait on to here, probably why it looks weird.

I had the libraries in drive "x", They were added to the arduino libraries.

[flopp]

@mugs said:

X:\Program Files\Program Files (x86)

is it installed as shown above?

I have it installed at

C:\Program Files (x86)

[mugs]

Yeah thats how it was installed. I have removed it all and reinstalled it back on to C drive. Still getting errors.

The example won't even compile directly on the codebender website

https://codebender.cc/example/MySensor/SerialGateway#SerialGateway.ino

[flopp]

Do you have an ATmega168 or ATmega328?
You have selected ATmega168

[mugs]

I am not sure :s.

But would that even matter if I can't verify the code before attempting to upload?

[flopp]

@mugs
You need to know what ATmega you have.

Yes it matters because they have different memory size.

I tried to compile Serial GW with Atmega168, not possible because sketch is too big.

Try with ATmega328 instead

[mugs]

It is the 328 I have.

[mugs]

Just tried again and the errors are slightly different. Sorry about the formatting.

Arduino: 1.6.10 (Windows 10), Board: "Arduino Nano, ATmega328"

WARNING: Category '' in library UIPEthernet is not valid. Setting to 'Uncategorized'
Build options changed, rebuilding all
In file included from C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:28:0,

             from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:15,

             from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:12:

C:\Program Files (x86)\Arduino\libraries\MySensors\MyTransportNRF24.h:38:30: error: 'RF24_CE_PIN' was not declared in this scope

MyTransportNRF24(uint8_t ce=RF24_CE_PIN, uint8_t cs=RF24_CS_PIN, uint8_t paLevel=RF24_PA_LEVEL);

                          ^

C:\Program Files (x86)\Arduino\libraries\MySensors\MyTransportNRF24.h:38:54: error: 'RF24_CS_PIN' was not declared in this scope

MyTransportNRF24(uint8_t ce=RF24_CE_PIN, uint8_t cs=RF24_CS_PIN, uint8_t paLevel=RF24_PA_LEVEL);

                                                  ^

C:\Program Files (x86)\Arduino\libraries\MySensors\MyTransportNRF24.h:38:83: error: 'RF24_PA_LEVEL' was not declared in this scope

MyTransportNRF24(uint8_t ce=RF24_CE_PIN, uint8_t cs=RF24_CS_PIN, uint8_t paLevel=RF24_PA_LEVEL);

                                                                               ^

In file included from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:15:0,

             from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:12:

C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:158:53: error: call to 'MyTransportNRF24::MyTransportNRF24(uint8_t, uint8_t, uint8_t)' uses the default argument for parameter 1, which is not yet defined

MySensor(MyTransport &radio =*new MyTransportNRF24(), MyHw &hw=*new MyHwDriver()

                                                 ^

C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:158:53: error: call to 'MyTransportNRF24::MyTransportNRF24(uint8_t, uint8_t, uint8_t)' uses the default argument for parameter 2, which is not yet defined

C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:158:53: error: call to 'MyTransportNRF24::MyTransportNRF24(uint8_t, uint8_t, uint8_t)' uses the default argument for parameter 3, which is not yet defined

In file included from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:12:0:

C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:39:28: error: 'DEFAULT_CE_PIN' was not declared in this scope

MyGateway(uint8_t _cepin=DEFAULT_CE_PIN, uint8_t _cspin=DEFAULT_CS_PIN, uint8_t _inclusion_time = 1, int8_t _inclusion_pin=-1, int8_t _rx=-1, int8_t _tx=-1, int8_t _er=-1);

                        ^

C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:39:59: error: 'DEFAULT_CS_PIN' was not declared in this scope

MyGateway(uint8_t _cepin=DEFAULT_CE_PIN, uint8_t _cspin=DEFAULT_CS_PIN, uint8_t _inclusion_time = 1, int8_t _inclusion_pin=-1, int8_t _rx=-1, int8_t _tx=-1, int8_t _er=-1);

                                                       ^

In file included from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:12:0:

C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:42:36: error: 'RF24_PA_LEVEL_GW' was not declared in this scope

void begin(rf24_pa_dbm_e paLevel=RF24_PA_LEVEL_GW, uint8_t channel=RF24_CHANNEL, rf24_datarate_e dataRate=RF24_DATARATE, void (*dataCallback)(char *)=NULL);

                                ^

C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:42:70: error: 'RF24_CHANNEL' was not declared in this scope

void begin(rf24_pa_dbm_e paLevel=RF24_PA_LEVEL_GW, uint8_t channel=RF24_CHANNEL, rf24_datarate_e dataRate=RF24_DATARATE, void (*dataCallback)(char *)=NULL);

                                                                  ^

C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:42:109: error: 'RF24_DATARATE' was not declared in this scope

void begin(rf24_pa_dbm_e paLevel=RF24_PA_LEVEL_GW, uint8_t channel=RF24_CHANNEL, rf24_datarate_e dataRate=RF24_DATARATE, void (*dataCallback)(char *)=NULL);

                                                                                                         ^

C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp: In constructor 'MyGateway::MyGateway(uint8_t, uint8_t, uint8_t, int8_t, int8_t, int8_t, int8_t)':

C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:30:163: error: no matching function for call to 'MySensor::MySensor(uint8_t&, uint8_t&)'

MyGateway::MyGateway(uint8_t _cepin, uint8_t _cspin, uint8_t _inclusion_time, int8_t _inclusion_pin, int8_t _rx, int8_t _tx, int8_t _er) : MySensor(_cepin, _cspin) {

                                                                                                                                                               ^

C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:30:163: note: candidates are:

In file included from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:15:0,

             from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:12:

C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:158:2: note: MySensor::MySensor(MyTransport&, MyHw&)

MySensor(MyTransport &radio =*new MyTransportNRF24(), MyHw &hw=*new MyHwDriver()

^

C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:158:2: note: no known conversion for argument 1 from 'uint8_t {aka unsigned char}' to 'MyTransport&'

C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:149:7: note: constexpr MySensor::MySensor(const MySensor&)

class MySensor

   ^

C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:149:7: note: candidate expects 1 argument, 2 provided

C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:149:7: note: constexpr MySensor::MySensor(MySensor&&)

C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:149:7: note: candidate expects 1 argument, 2 provided

C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp: In member function 'void MyGateway::begin(rf24_pa_dbm_e, uint8_t, rf24_datarate_e, void ()(char))':

C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:40:15: error: 'BAUD_RATE' was not declared in this scope

Serial.begin(BAUD_RATE);

           ^

C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:44:20: error: 'setupRepeaterMode' was not declared in this scope

setupRepeaterMode();

                ^

C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:87:39: error: 'setupRadio' was not declared in this scope

setupRadio(paLevel, channel, dataRate);

                                   ^

C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:88:36: error: 'BASE_RADIO_ID' was not declared in this scope

RF24::openReadingPipe(WRITE_PIPE, BASE_RADIO_ID);

                                ^

C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:90:23: error: cannot call member function 'void RF24::startListening()' without object

RF24::startListening();

                   ^

exit status 1
Error compiling for board Arduino Nano.

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

[flopp]

@mugs said:

WARNING: Category '' in library UIPEthernet is not valid. Setting to 'Uncategorized'
Build options changed, rebuilding all

This is normal, I also get this.

I am using Arduino 1.6.8, Arduino Board 1.6.12, MySensors 1.5.1, Windows 10

I can Compile Serial GW, Nano 328 with no problem.

Maybe you can try to install IDE 1.6.8

[flopp]

Check here
https://forum.mysensors.org/topic/4570/mysensors-ethernet-gw-w5100-problem/5

Problem with 1.6.9 and 1.6.10 but they were using MySensors 2.0

[mugs]

I have the exact versions as you now . Verified and uploaded perfectly.

Thanks for your help

[flopp]

@mugs
Nice, no problem.