Can not compile serial gateway on codebender or ide
-
I have tried to compile the serial gateway code before uploading to my nano and I keep getting errors. I have used code bender and the IDE. Used the libraries from 1.4 and 1.5 with no difference.
The below text is the error from codebender.
*Looks like your project uses header files or libraries that do not exist in our system, in your personal libraries or in your sketch. More info
In file included from (sketch file) SerialGateway.ino:50:
(personal library file) MySensors/MySensor.h:158:70: error: unknown type name 'MyHwDriver'MySensor(MyTransport &radio =*new MyTransportNRF24(), MyHw &hw=*new MyHwDriver() ^(sketch file) SerialGateway.ino:71:1: error: unknown type name 'MyHwATMega328'
MyHwATMega328 hw;
^
*The below text is from Arduino IDE.
*Arduino: 1.6.10 (Windows 10), Board: "Arduino Nano, ATmega168"
In file included from X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:12:0:
X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:39:28: error: 'DEFAULT_CE_PIN' was not declared in this scope
MyGateway(uint8_t _cepin=DEFAULT_CE_PIN, uint8_t _cspin=DEFAULT_CS_PIN, uint8_t _inclusion_time = 1, int8_t _inclusion_pin=-1, int8_t _rx=-1, int8_t _tx=-1, int8_t _er=-1);
^X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:39:59: error: 'DEFAULT_CS_PIN' was not declared in this scope
MyGateway(uint8_t _cepin=DEFAULT_CE_PIN, uint8_t _cspin=DEFAULT_CS_PIN, uint8_t _inclusion_time = 1, int8_t _inclusion_pin=-1, int8_t _rx=-1, int8_t _tx=-1, int8_t _er=-1);
^X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp: In constructor 'MyGateway::MyGateway(uint8_t, uint8_t, uint8_t, int8_t, int8_t, int8_t, int8_t)':
X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:30:163: error: no matching function for call to 'MySensor::MySensor(uint8_t&, uint8_t&)'
MyGateway::MyGateway(uint8_t _cepin, uint8_t _cspin, uint8_t _inclusion_time, int8_t _inclusion_pin, int8_t _rx, int8_t _tx, int8_t _er) : MySensor(_cepin, _cspin) {
^X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:30:163: note: candidates are:
In file included from X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:15:0,
from X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:12:X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:158:2: note: MySensor::MySensor(MyTransport&, MyHw&)
MySensor(MyTransport &radio =*new MyTransportNRF24(), MyHw &hw=*new MyHwDriver()
^
X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:158:2: note: no known conversion for argument 1 from 'uint8_t {aka unsigned char}' to 'MyTransport&'
X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:149:7: note: constexpr MySensor::MySensor(const MySensor&)
class MySensor
^X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:149:7: note: candidate expects 1 argument, 2 provided
X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:149:7: note: constexpr MySensor::MySensor(MySensor&&)
X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:149:7: note: candidate expects 1 argument, 2 provided
X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp: In member function 'void MyGateway::begin(rf24_pa_dbm_e, uint8_t, rf24_datarate_e, void ()(char))':
X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:44:20: error: 'setupRepeaterMode' was not declared in this scope
setupRepeaterMode();
^X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:87:39: error: 'setupRadio' was not declared in this scope
setupRadio(paLevel, channel, dataRate);
^X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:88:36: error: 'BASE_RADIO_ID' was not declared in this scope
RF24::openReadingPipe(WRITE_PIPE, BASE_RADIO_ID);
^X:\Program Files\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:90:23: error: cannot call member function 'void RF24::startListening()' without object
RF24::startListening();
^exit status 1
Error compiling for board Arduino Nano.
Invalid library found in X:\Program Files\Program Files (x86)\Arduino\libraries\libraries: X:\Program Files\Program Files (x86)\Arduino\libraries\librariesThis report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
*Thanks in advance
-
Yeah thats how it was installed. I have removed it all and reinstalled it back on to C drive. Still getting errors.
The example won't even compile directly on the codebender website
https://codebender.cc/example/MySensor/SerialGateway#SerialGateway.ino
-
I am not sure :s.
But would that even matter if I can't verify the code before attempting to upload?
-
Just tried again and the errors are slightly different. Sorry about the formatting.
Arduino: 1.6.10 (Windows 10), Board: "Arduino Nano, ATmega328"
WARNING: Category '' in library UIPEthernet is not valid. Setting to 'Uncategorized'
Build options changed, rebuilding all
In file included from C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:28:0,from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:15, from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:12:C:\Program Files (x86)\Arduino\libraries\MySensors\MyTransportNRF24.h:38:30: error: 'RF24_CE_PIN' was not declared in this scope
MyTransportNRF24(uint8_t ce=RF24_CE_PIN, uint8_t cs=RF24_CS_PIN, uint8_t paLevel=RF24_PA_LEVEL);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyTransportNRF24.h:38:54: error: 'RF24_CS_PIN' was not declared in this scope
MyTransportNRF24(uint8_t ce=RF24_CE_PIN, uint8_t cs=RF24_CS_PIN, uint8_t paLevel=RF24_PA_LEVEL);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyTransportNRF24.h:38:83: error: 'RF24_PA_LEVEL' was not declared in this scope
MyTransportNRF24(uint8_t ce=RF24_CE_PIN, uint8_t cs=RF24_CS_PIN, uint8_t paLevel=RF24_PA_LEVEL);
^In file included from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:15:0,
from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:12:C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:158:53: error: call to 'MyTransportNRF24::MyTransportNRF24(uint8_t, uint8_t, uint8_t)' uses the default argument for parameter 1, which is not yet defined
MySensor(MyTransport &radio =*new MyTransportNRF24(), MyHw &hw=*new MyHwDriver()
^C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:158:53: error: call to 'MyTransportNRF24::MyTransportNRF24(uint8_t, uint8_t, uint8_t)' uses the default argument for parameter 2, which is not yet defined
C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:158:53: error: call to 'MyTransportNRF24::MyTransportNRF24(uint8_t, uint8_t, uint8_t)' uses the default argument for parameter 3, which is not yet defined
In file included from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:12:0:
C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:39:28: error: 'DEFAULT_CE_PIN' was not declared in this scope
MyGateway(uint8_t _cepin=DEFAULT_CE_PIN, uint8_t _cspin=DEFAULT_CS_PIN, uint8_t _inclusion_time = 1, int8_t _inclusion_pin=-1, int8_t _rx=-1, int8_t _tx=-1, int8_t _er=-1);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:39:59: error: 'DEFAULT_CS_PIN' was not declared in this scope
MyGateway(uint8_t _cepin=DEFAULT_CE_PIN, uint8_t _cspin=DEFAULT_CS_PIN, uint8_t _inclusion_time = 1, int8_t _inclusion_pin=-1, int8_t _rx=-1, int8_t _tx=-1, int8_t _er=-1);
^In file included from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:12:0:
C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:42:36: error: 'RF24_PA_LEVEL_GW' was not declared in this scope
void begin(rf24_pa_dbm_e paLevel=RF24_PA_LEVEL_GW, uint8_t channel=RF24_CHANNEL, rf24_datarate_e dataRate=RF24_DATARATE, void (*dataCallback)(char *)=NULL);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:42:70: error: 'RF24_CHANNEL' was not declared in this scope
void begin(rf24_pa_dbm_e paLevel=RF24_PA_LEVEL_GW, uint8_t channel=RF24_CHANNEL, rf24_datarate_e dataRate=RF24_DATARATE, void (*dataCallback)(char *)=NULL);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:42:109: error: 'RF24_DATARATE' was not declared in this scope
void begin(rf24_pa_dbm_e paLevel=RF24_PA_LEVEL_GW, uint8_t channel=RF24_CHANNEL, rf24_datarate_e dataRate=RF24_DATARATE, void (*dataCallback)(char *)=NULL);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp: In constructor 'MyGateway::MyGateway(uint8_t, uint8_t, uint8_t, int8_t, int8_t, int8_t, int8_t)':
C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:30:163: error: no matching function for call to 'MySensor::MySensor(uint8_t&, uint8_t&)'
MyGateway::MyGateway(uint8_t _cepin, uint8_t _cspin, uint8_t _inclusion_time, int8_t _inclusion_pin, int8_t _rx, int8_t _tx, int8_t _er) : MySensor(_cepin, _cspin) {
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:30:163: note: candidates are:
In file included from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:15:0,
from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:12:C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:158:2: note: MySensor::MySensor(MyTransport&, MyHw&)
MySensor(MyTransport &radio =*new MyTransportNRF24(), MyHw &hw=*new MyHwDriver()
^
C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:158:2: note: no known conversion for argument 1 from 'uint8_t {aka unsigned char}' to 'MyTransport&'
C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:149:7: note: constexpr MySensor::MySensor(const MySensor&)
class MySensor
^C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:149:7: note: candidate expects 1 argument, 2 provided
C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:149:7: note: constexpr MySensor::MySensor(MySensor&&)
C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:149:7: note: candidate expects 1 argument, 2 provided
C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp: In member function 'void MyGateway::begin(rf24_pa_dbm_e, uint8_t, rf24_datarate_e, void ()(char))':
C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:40:15: error: 'BAUD_RATE' was not declared in this scope
Serial.begin(BAUD_RATE);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:44:20: error: 'setupRepeaterMode' was not declared in this scope
setupRepeaterMode();
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:87:39: error: 'setupRadio' was not declared in this scope
setupRadio(paLevel, channel, dataRate);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:88:36: error: 'BASE_RADIO_ID' was not declared in this scope
RF24::openReadingPipe(WRITE_PIPE, BASE_RADIO_ID);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:90:23: error: cannot call member function 'void RF24::startListening()' without object
RF24::startListening();
^exit status 1
Error compiling for board Arduino Nano.This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences. -
@mugs said:
WARNING: Category '' in library UIPEthernet is not valid. Setting to 'Uncategorized'
Build options changed, rebuilding allThis is normal, I also get this.
I am using Arduino 1.6.8, Arduino Board 1.6.12, MySensors 1.5.1, Windows 10
I can Compile Serial GW, Nano 328 with no problem.
Maybe you can try to install IDE 1.6.8
-
Check here
https://forum.mysensors.org/topic/4570/mysensors-ethernet-gw-w5100-problem/5Problem with 1.6.9 and 1.6.10 but they were using MySensors 2.0
