Can not compile serial gateway on codebender or ide
-
Yeah thats how it was installed. I have removed it all and reinstalled it back on to C drive. Still getting errors.
The example won't even compile directly on the codebender website
https://codebender.cc/example/MySensor/SerialGateway#SerialGateway.ino
-
I am not sure :s.
But would that even matter if I can't verify the code before attempting to upload?
-
Just tried again and the errors are slightly different. Sorry about the formatting.
Arduino: 1.6.10 (Windows 10), Board: "Arduino Nano, ATmega328"
WARNING: Category '' in library UIPEthernet is not valid. Setting to 'Uncategorized'
Build options changed, rebuilding all
In file included from C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:28:0,from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:15, from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:12:C:\Program Files (x86)\Arduino\libraries\MySensors\MyTransportNRF24.h:38:30: error: 'RF24_CE_PIN' was not declared in this scope
MyTransportNRF24(uint8_t ce=RF24_CE_PIN, uint8_t cs=RF24_CS_PIN, uint8_t paLevel=RF24_PA_LEVEL);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyTransportNRF24.h:38:54: error: 'RF24_CS_PIN' was not declared in this scope
MyTransportNRF24(uint8_t ce=RF24_CE_PIN, uint8_t cs=RF24_CS_PIN, uint8_t paLevel=RF24_PA_LEVEL);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyTransportNRF24.h:38:83: error: 'RF24_PA_LEVEL' was not declared in this scope
MyTransportNRF24(uint8_t ce=RF24_CE_PIN, uint8_t cs=RF24_CS_PIN, uint8_t paLevel=RF24_PA_LEVEL);
^In file included from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:15:0,
from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:12:C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:158:53: error: call to 'MyTransportNRF24::MyTransportNRF24(uint8_t, uint8_t, uint8_t)' uses the default argument for parameter 1, which is not yet defined
MySensor(MyTransport &radio =*new MyTransportNRF24(), MyHw &hw=*new MyHwDriver()
^C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:158:53: error: call to 'MyTransportNRF24::MyTransportNRF24(uint8_t, uint8_t, uint8_t)' uses the default argument for parameter 2, which is not yet defined
C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:158:53: error: call to 'MyTransportNRF24::MyTransportNRF24(uint8_t, uint8_t, uint8_t)' uses the default argument for parameter 3, which is not yet defined
In file included from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:12:0:
C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:39:28: error: 'DEFAULT_CE_PIN' was not declared in this scope
MyGateway(uint8_t _cepin=DEFAULT_CE_PIN, uint8_t _cspin=DEFAULT_CS_PIN, uint8_t _inclusion_time = 1, int8_t _inclusion_pin=-1, int8_t _rx=-1, int8_t _tx=-1, int8_t _er=-1);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:39:59: error: 'DEFAULT_CS_PIN' was not declared in this scope
MyGateway(uint8_t _cepin=DEFAULT_CE_PIN, uint8_t _cspin=DEFAULT_CS_PIN, uint8_t _inclusion_time = 1, int8_t _inclusion_pin=-1, int8_t _rx=-1, int8_t _tx=-1, int8_t _er=-1);
^In file included from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:12:0:
C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:42:36: error: 'RF24_PA_LEVEL_GW' was not declared in this scope
void begin(rf24_pa_dbm_e paLevel=RF24_PA_LEVEL_GW, uint8_t channel=RF24_CHANNEL, rf24_datarate_e dataRate=RF24_DATARATE, void (*dataCallback)(char *)=NULL);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:42:70: error: 'RF24_CHANNEL' was not declared in this scope
void begin(rf24_pa_dbm_e paLevel=RF24_PA_LEVEL_GW, uint8_t channel=RF24_CHANNEL, rf24_datarate_e dataRate=RF24_DATARATE, void (*dataCallback)(char *)=NULL);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:42:109: error: 'RF24_DATARATE' was not declared in this scope
void begin(rf24_pa_dbm_e paLevel=RF24_PA_LEVEL_GW, uint8_t channel=RF24_CHANNEL, rf24_datarate_e dataRate=RF24_DATARATE, void (*dataCallback)(char *)=NULL);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp: In constructor 'MyGateway::MyGateway(uint8_t, uint8_t, uint8_t, int8_t, int8_t, int8_t, int8_t)':
C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:30:163: error: no matching function for call to 'MySensor::MySensor(uint8_t&, uint8_t&)'
MyGateway::MyGateway(uint8_t _cepin, uint8_t _cspin, uint8_t _inclusion_time, int8_t _inclusion_pin, int8_t _rx, int8_t _tx, int8_t _er) : MySensor(_cepin, _cspin) {
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:30:163: note: candidates are:
In file included from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.h:15:0,
from C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:12:C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:158:2: note: MySensor::MySensor(MyTransport&, MyHw&)
MySensor(MyTransport &radio =*new MyTransportNRF24(), MyHw &hw=*new MyHwDriver()
^
C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:158:2: note: no known conversion for argument 1 from 'uint8_t {aka unsigned char}' to 'MyTransport&'
C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:149:7: note: constexpr MySensor::MySensor(const MySensor&)
class MySensor
^C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:149:7: note: candidate expects 1 argument, 2 provided
C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:149:7: note: constexpr MySensor::MySensor(MySensor&&)
C:\Program Files (x86)\Arduino\libraries\MySensors\MySensor.h:149:7: note: candidate expects 1 argument, 2 provided
C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp: In member function 'void MyGateway::begin(rf24_pa_dbm_e, uint8_t, rf24_datarate_e, void ()(char))':
C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:40:15: error: 'BAUD_RATE' was not declared in this scope
Serial.begin(BAUD_RATE);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:44:20: error: 'setupRepeaterMode' was not declared in this scope
setupRepeaterMode();
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:87:39: error: 'setupRadio' was not declared in this scope
setupRadio(paLevel, channel, dataRate);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:88:36: error: 'BASE_RADIO_ID' was not declared in this scope
RF24::openReadingPipe(WRITE_PIPE, BASE_RADIO_ID);
^C:\Program Files (x86)\Arduino\libraries\MySensors\MyGateway.cpp:90:23: error: cannot call member function 'void RF24::startListening()' without object
RF24::startListening();
^exit status 1
Error compiling for board Arduino Nano.This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences. -
@mugs said:
WARNING: Category '' in library UIPEthernet is not valid. Setting to 'Uncategorized'
Build options changed, rebuilding allThis is normal, I also get this.
I am using Arduino 1.6.8, Arduino Board 1.6.12, MySensors 1.5.1, Windows 10
I can Compile Serial GW, Nano 328 with no problem.
Maybe you can try to install IDE 1.6.8
-
Check here
https://forum.mysensors.org/topic/4570/mysensors-ethernet-gw-w5100-problem/5Problem with 1.6.9 and 1.6.10 but they were using MySensors 2.0
