How to force DS18B20s to use 12 bit outputs.
-
I have a string of 6 DS18x20s on an arduino reader. The output from the Arduino is reporting all sensors with 9 bit resolution. How can I force it to the full 12 bit resolution on the DS18B20s? If one of the sensors is a 9 bit DS18S20, will that force the reader to convert all the other sensors at the same resolution?
-
I have a string of 6 DS18x20s on an arduino reader. The output from the Arduino is reporting all sensors with 9 bit resolution. How can I force it to the full 12 bit resolution on the DS18B20s? If one of the sensors is a 9 bit DS18S20, will that force the reader to convert all the other sensors at the same resolution?
@robertober https://forum.mysensors.org/topic/2686/improve-ds18b20-resolution/ has instructions. Don't miss the note on accuracy vs resolution
-
Thanks for the feedback. I have several graphs in my XTension Webremote that are showing my temperatures as a seesaw between whole degrees. Accuracy is fine, the half degree C is more than close enough, I just want the graphs to be smoother.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login