Switchcases?
-
Hi.
I need a little advice on where I can get cases similar to these:
http://se.rs-online.com/web/p/products/0583432/
Cheaper would be better. If I get these cases the complete switching module gets as expensive as generic z-wave device. And then there is almost no point in making them myself.
-
hello
if you live in EU, you can have a look at tme. -
There is still a point. They will be better :-D
The cheapest I've seen are these
- https://www.kjell.com/se/sortiment/el-verktyg/smarta-hem/433-mhz/fjarrstrombrytare/utanpaliggande-brytare/luxorparts-fjarrstrombrytare-2000-w-3-pack-p50219
- http://www.clasohlson.com/se/Fjärrströmbrytare-3-pack-Nexa-PE-3/36-4602
- http://www.rusta.com/se/fjarrstrombrytare-3i1-p92201069.aspx
- http://www.biltema.se/sv/Bygg/El/Elektrikerverktyg/Fjarrstrombrytare-mini-3-pack-2000021449/ (not sure if these are big enough)
They can be retrofitted with MySensor nodes.
Another alternative might be to see if there is room enough in something like this, but it will be tight http://www.biltema.se/sv/Bygg/El/Grenkontakt/Grenuttag-med-brytare-2000038281/
-
You can also use this solution. It's not extremely cheap but it's all already done, you can reprogram the ESP8266 inside to put a MySensors gateway sketch.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login