[Solved] LightSensor serial LOG

[Marek Běluša]

Sketch:

https://www.mysensors.org/build/light-bh1750

Could you please explain what does mean TSM failure in serial LOG:

Starting sensor (RNNNA-, 2.0.0)
TSM:INIT
TSM:RADIO:OK
TSM:FPAR
TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
!TSM:FPAR:FAIL
!TSM:FAILURE
TSM:PDT
TSM:INIT
TSM:RADIO:OK

Using Domoticz with ethernet gateway, gateway log in domoticz is OK but no sonsors available

Thanks for help!

[Marek Běluša]

Solved! After many hours spend ....

China fake moduls on sensor side!

http://www.ebay.com/itm/191784626751?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

.....change for this type and works OK

http://www.ebay.com/itm/191902452981?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

[Marek Běluša]

... recommend to use 1000uF on gateway 3.3V side if you powered it from arduino

[tekka]

@Marek-Běluša said:

Solved! After many hours spend ....

China fake moduls on sensor side!

http://www.ebay.com/itm/191784626751?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

.....change for this type and works OK

http://www.ebay.com/itm/191902452981?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Yeah, the "blob" modules are the worst ones