Error: Serial Port closed!... Error: End of file..

[Cliff Karlsson]

I just updated my NRF24 connected gateway from 1.6 to 2.0. I have a power pulse-meter that works and constantly is sending data with no problem. But as soon as I add another sensor the gateway sops working in domoticz and resets itself every 30 secs.

I just tried connecting a motion sensor to a pro mini with a nrf24 and uploaded a standard motion sensor sketch, and it crached the gateway directly. What can be causing this?

this is from the serial monitor:

Starting sensor (RNNNA-, 2.0.0)
TSM:INIT
TSM:RADIO:OK
TSP:ASSIGNID:OK (ID=50)
TSM:FPAR
TSP:MSG:SEND 50-50-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 50-50-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 50-50-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 50-50-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
!TSM:FPAR:FAIL
!TSM:FAILURE
TSM:PDT
TSM:INIT
TSM:RADIO:OK
TSP:ASSIGNID:OK (ID=50)
TSM:FPAR
TSP:MSG:SEND 50-50-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 50-50-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 50-50-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR

[Cliff Karlsson]

I think I solved it by adding a nrf 5 -> 3.3 v adapterboard so I guess it was power related.

[flopp]

To which unit did you add the 5->3.3v?
Gateway or Motion?

[flopp]

I tried to reprogram the Arduino Nano but that didn't helped.
Changed com port on computer and that seems to solve my problem