Domoticz, MQTT and OTA - All in one
-
What I am aiming for is a Domoticz controller using an MQTT Ethernet gateway running on a RPI with Pro Mini (8MHz and 16Mhz) nodes using nRF24L01 radios. All this I can get running, no problem. The question is how do I deploy OTA firmware updates.
I know Domoticz does not support OTA. MYScontroller does but not via MQTT. MyController does but does it support MQTT and is it a viable alternative to Domoticz?
Currently my thinking is to have a completely separate Ethernet or Serial Arduino Gateway to be used only for OTA. When I need to do firmware updates I will have to disconnect the RPI MQTT Gateway and fire up the dedicated gateway to do the OTA updates with MYScontroller.
Does this makes sense or is there a better way??
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login