Handling push buttons events
-
Hi !
I'm planning to drive lights with my MySensors devices :
I have some Mysensors devices with 8 light outputs (dimmers boards and relay boards),
and I have some Mysensors devices with 8 push button inputs.I'm used to have 3 functions on the same button with my previous home automation system :
I have the "short press" event, "long press begining" event, and the "long press release" event.
Using these events, I usually set different actions on short press events and on long press begin events.
This allows me , i.e., to drive 2 differents lights with the same button, or to set a dim level with a long press, and an ON/OFF command on a short press.How should I define my Mysensors devices to return the short press/long press/release events , that can be handled by domoticz ?
What would be the best way to handle those kind of events in Domoticz ?Perhaps using the "V_TEXT" subdevice type could allow me to report differents events "PULSE/HOLD/RELEASE", but I suppose then I'll have to use nothing else but scripts to handle these on domoticz ?
-
@napo7 I am doing something similar. At first I tried to have Domoticz handle the short/long keypresses. Not very succesfull because of timing. i.e. I was not able to get dimming realiable. In my case I have the actuator (key fob) time the key-press and send the dimming level. As there is no up/down dimming command I use the V_UP/ V_DOWN of the S_COVER.
-
Handling the short press/long press/release by the arduino is quite easy.
I can already send a different event regarding what happens on each button, but the event has to be handled by domoticz
Previously, I was using a custom-made software for all my home automation.
I handled the thing like this :
When event is "pulse" :
if timer is OFF and light is OFF :
- Turn a timer ON for 5 seconds.
- Turn light to 1st dim level (levels are 2, 5, 10, 30, 50 and 100%)
if light is ON and timer is ON :- Reset timer to 5s.
- Turn light to next dim level
If light is ON but timer is OFF : - Turn light OFF
when event is "hold" :
-do another action (ie. turn on/off another light)...That was working corretly, I did put this script in a function that I could reuse for each light easily, but it was my own home automation system software, and now I want to turn to another system, no more time to fix/enhance my own software !
