Nano gateway error (solved)

[bobbybobbybobby]

hi i have a problem..

i run an rpi3 with domoticz i have a powerd usbhub connected to it.
i have an nano with nrf+ with antenna (solderd an 4,7 cap to it)

when i connect it all with dupond cables the gateway works. but now i solderit all to an prototyping board and now i get the error...

i tried connecting the nrf to an external power suply but still get this error..

what can i do?

0;255;3;0;9;MCO:BGN:INIT GW,CP=RNNGA--,VER=2.1.1
0;255;3;0;9;TSM:INIT
0;255;3;0;9;TSF:WUR:MS=0
0;255;3;0;9;!TSM:INIT:TSP FAIL
0;255;3;0;9;TSM:FAIL:CNT=1
0;255;3;0;9;TSM:FAIL:PDT
0;255;3;0;9;TSM:FAIL:RE-INIT
0;255;3;0;9;TSM:INIT
0;255;3;0;9;!TSM:INIT:TSP FAIL```

[tbowmo]

double check all your wires, it seems that the firmware can't get a response from the radio module?

[bobbybobbybobby]

@tbowmo

Thanks! It indeed was a wire problem..