Node-Red ESPeasy and RF24 talking each other
-
I am using Node-Red under RPi with some ESP8266 nodes working with ESPEasy exchanging MQTT messages.
Because there still are 5 nodes out of WIFI range, i decided to use some nRF24 with PA and LNA. I know that i could use some Extended WIFI Range devices but we must forget this option for now.I was reading Mysensors and found that ESP8266 Gateway might be a bridge between RF24 telegrams and Nodered.
Am i right or am I forgetting something? -
I found a solution to my problem. Just i had to read a little more.
Node-red is working fine with ESPEasy as firmware of ESP8266-12 over WIFI.
Then i added a Bridge using a ESP8266 Gateway.
I downloaded MySensors 2.1.0 library and built each new sketchs.
I had to learn about how to program them using examples. It was easy.
Then add node-red mysensor module to RPi and I wrote the flows. Easy too.My new system is mixing ESPEasy and RF24 with MySensors and is working under Node-Red.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login