Sensor Type



  • Hi All,

    I am a Domoticz newby. My first sensor is a door switch. I have a few questions regarding the setup of this sensor:

    1. If I look in the Switches tab, the sensor is listed but the type is listed as: "Lighting 2, AC, Contact" What does the Lighting 2 and AC mean and can I change it?
    2. It takes about 4 seconds after the sensor has transmitted the data before the status is updated? Is there somewhere a setting were I can change the delay?

    Thanks


  • Mod

    It's a web page, a delay it's normal.


  • Hardware Contributor

    @FredRoot - I think you will get better answers at the Domoticz forums but all switches I have are AC/Lightning 2 and I can't change it.

    About the delay it's because of the web page isn't updated quick. The switch are updated quite fast if you run a script for example.



  • Thanks for the feedback. I will start to look into scripting


Log in to reply
 

Suggested Topics

  • 5
  • 1
  • 4
  • 4
  • 8
  • 2

1
Online

11.2k
Users

11.1k
Topics

112.5k
Posts