Installation instruction OpenHAB2 + MQTT gateway
-
Hello! Tell me please, what should I do to OpenHAB 2 started working with the MQTT gateway? There is somewhere understandable step-by-step instructions for configuring the OpenHAB 2 + MySensors (MQTT gateway)?
@vladimir I don't use OpenHab myself, but https://forum.mysensors.org/topic/4415/my-final-setup-to-get-mysensors-and-openhab-communicating-via-mqtt looks quite comprehensive. If you have already looked at that, and it was not complete enough, could you describe what you are missing?
-
@vladimir I don't use OpenHab myself, but https://forum.mysensors.org/topic/4415/my-final-setup-to-get-mysensors-and-openhab-communicating-via-mqtt looks quite comprehensive. If you have already looked at that, and it was not complete enough, could you describe what you are missing?
-
@mfalkvidd I can not understand where to find the file openhab.cfg
@vladimir did you look at https://community.openhab.org/t/where-is-openhab-cfg/20348 ? If so, could you clarify why that didn't help you?
-
@vladimir did you look at https://community.openhab.org/t/where-is-openhab-cfg/20348 ? If so, could you clarify why that didn't help you?
@mfalkvidd It looks like the whole problem is that I'm trying to do this in the Mac OS. Very strange, but even the debugging mode does not display real-time information.
-
@vladimir did you look at https://community.openhab.org/t/where-is-openhab-cfg/20348 ? If so, could you clarify why that didn't help you?
-
@mfalkvidd It is very strange that in the presence of such a large community, there are no detailed step-by-step instructions, everything is scattered in different places.
Thank you very much for your help!@vladimir it would be great if you could write step-by-step instructions that are detailed enough. We could publish them on https://www.mysensors.org/controller/openhab
Now that you've just gone through the process it should be fresh in your mind so writing it should be super easy.
-
@vladimir it would be great if you could write step-by-step instructions that are detailed enough. We could publish them on https://www.mysensors.org/controller/openhab
Now that you've just gone through the process it should be fresh in your mind so writing it should be super easy.
@mfalkvidd The fact of the matter is that I could not figure it out. Here are the problems that I now faced:
- In OpenHAB2, on the Mac OS, debugging information is not displayed when starting start_debug.sh
- I still could not understand why in OpenHAB2, there is no MQTT gateway in the list:
-
@mfalkvidd The fact of the matter is that I could not figure it out. Here are the problems that I now faced:
- In OpenHAB2, on the Mac OS, debugging information is not displayed when starting start_debug.sh
- I still could not understand why in OpenHAB2, there is no MQTT gateway in the list:
-
@vladimir mysensors mqtt gateway connect to the mosquitto broker, openhab also connect to mosquitto so you should install the mqtt binding in openhab. in the tutorial i think that in my config "openhab.cfg" is this file /etc/openhab2/services/mqtt.cfg
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login