Installation instruction OpenHAB2 + MQTT gateway

[vladimir]

Hello! Tell me please, what should I do to OpenHAB 2 started working with the MQTT gateway? There is somewhere understandable step-by-step instructions for configuring the OpenHAB 2 + MySensors (MQTT gateway)?

[mfalkvidd]

@vladimir I don't use OpenHab myself, but https://forum.mysensors.org/topic/4415/my-final-setup-to-get-mysensors-and-openhab-communicating-via-mqtt looks quite comprehensive. If you have already looked at that, and it was not complete enough, could you describe what you are missing?

[vladimir]

This post is deleted!

[vladimir]

@mfalkvidd I can not understand where to find the file openhab.cfg

[mfalkvidd]

@vladimir did you look at https://community.openhab.org/t/where-is-openhab-cfg/20348 ? If so, could you clarify why that didn't help you?

[vladimir]

@mfalkvidd It looks like the whole problem is that I'm trying to do this in the Mac OS. Very strange, but even the debugging mode does not display real-time information.

[vladimir]

@mfalkvidd It is very strange that in the presence of such a large community, there are no detailed step-by-step instructions, everything is scattered in different places.
Thank you very much for your help!

[mfalkvidd]

@vladimir it would be great if you could write step-by-step instructions that are detailed enough. We could publish them on https://www.mysensors.org/controller/openhab

Now that you've just gone through the process it should be fresh in your mind so writing it should be super easy.

[vladimir]

@mfalkvidd The fact of the matter is that I could not figure it out. Here are the problems that I now faced:

1. In OpenHAB2, on the Mac OS, debugging information is not displayed when starting start_debug.sh
2. I still could not understand why in OpenHAB2, there is no MQTT gateway in the list:
   

[haggis]

@vladimir mysensors mqtt gateway connect to the mosquitto broker, openhab also connect to mosquitto so you should install the mqtt binding in openhab. in the tutorial i think that in my config "openhab.cfg" is this file /etc/openhab2/services/mqtt.cfg

[haggis]

@haggis https://forum.mysensors.org/topic/3605/can-t-get-openhab2-to-see-my-mqtt-messages/3