[SOLVED] EasyEDA gerber files
-
I am wondering if other people here have used EasyEDA and if you have had any problems with the gerbers generated from there. I am trying to post one of my boards on openhardware.io and it doesn't like the gerbers. I have been working a bit with @hek on this and he suggested posting the question in here.
It's looking like the files that may be the problem are the 2 .drl files. I tested the files on https://circuitpeople.com/, and this is what it came up with:
Will things work without those two files? -
I am wondering if other people here have used EasyEDA and if you have had any problems with the gerbers generated from there. I am trying to post one of my boards on openhardware.io and it doesn't like the gerbers. I have been working a bit with @hek on this and he suggested posting the question in here.
It's looking like the files that may be the problem are the 2 .drl files. I tested the files on https://circuitpeople.com/, and this is what it came up with:
Will things work without those two files?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login