Compiling Sensebender Micro with latest 2.1.0 version of MySensors library ????

[Ger Kersten]

Re: Sensebender Micro

Hi all,

I've been trying for a couple of days to get the SensebenderMicro.ino file compiling with the 2.1.0 version version of MySensors library.
There are some missing (sub) libraries like RunningAverage, sha204 and SI7021; I've copied these from MySensors 1.5.4 release.
I've also added MySensors 2.1.0 libray, but when compiling SensebenderMicro.ino (according to comment, version 1.4), I get
compiler error:

In function `setup':

...\SensebenderMicro.ino:168: undefined reference to `getControllerConfig()'

My question: where is a complete (and consistent) description of (re)building the sketch for Sensebender micro?
Currently I'm feeling kind of lost.

Ger

[mfalkvidd]

@Ger-Kersten I don't know a good answer to your question (I don't use the Sensebender) but I think the solution for getControllerConfig is available at https://forum.mysensors.org/post/57603

[korttoma]

@Ger-Kersten did you try the latest version of the SensebenderMicro sketch from github? -> https://github.com/mysensors/SensebenderMicro/tree/master/Arduino/SensebenderMicro

All the other libraries have now been collected here -> https://github.com/mysensors/MySensorsArduinoExamples

[Ger Kersten]

@korttoma

hi Tomas,

thanks for the links. I'll try again with these versions, will respond wether it works or not.

Ger

[Ger Kersten]

@korttoma
hi Tomas,

it was a beginners error. Using latest github sketch for SensebenderMicro.ino, MySensors lib 2.1.0 and the needed libraries from the MySensorsArduinoExamples just worked out of the box.

Thanks again for the links.

[espenf]

I still have the same error message. I've updated libraries. I'm currently using Arduino IDE 1.8.5 (W10 app) if that matters.
Any ideas on how to fix this? I've got 3 sensebender micro's that would be of better use as temperature sensors than just lying on my desk...

[mfalkvidd]

@espenf with "the same", do you mean the error message in the first post in this thread? If so, the posted solution has been verified as working. Could you explain a bit more about what you have tried?

[espenf]

Yes. I've tried to compile using the SensebenderMicro.ino sketch from mysensors.org/hardware/micro and the MySensors 2.1.0 library plus the known "MySensorsArduinoExamples-master"-libraries.

I've also tried to update the libraries from within the IDE, but that did not work, so I've started over with the libraries from github again after reading this topic.

I guess I've overlooked something, but i'm not quite sure where to go from here.

Edit five minutes later:
Yep, I've overlooked this little detail from that thread @mrfalkvidd refered to:
Fixed, seems in V2.1.1 it changed to "getControllerConfig".

[mfalkvidd]

@espenf nice work. Thanks for reporting back.