Skip to content
  • MySensors
  • OpenHardware.io
  • Categories
  • Recent
  • Tags
  • Popular
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor
  • Default (No Skin)
  • No Skin
Collapse
Brand Logo
  1. Home
  2. Troubleshooting
  3. mysgw MQTT Issues

mysgw MQTT Issues

Scheduled Pinned Locked Moved Troubleshooting
22 Posts 3 Posters 2.3k Views 3 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • gohanG Offline
    gohanG Offline
    gohan
    Mod
    wrote on last edited by
    #6

    add capacitor and try again

    X 1 Reply Last reply
    0
    • gohanG gohan

      add capacitor and try again

      X Offline
      X Offline
      xefil
      wrote on last edited by
      #7

      @gohan said in mysgw MQTT Issues:

      add capacitor and try again

      Size? 100uF enough?

      1 Reply Last reply
      0
      • gohanG Offline
        gohanG Offline
        gohan
        Mod
        wrote on last edited by
        #8

        Yes, I use 10uF ceramic because of low ESR

        X 1 Reply Last reply
        0
        • gohanG gohan

          Yes, I use 10uF ceramic because of low ESR

          X Offline
          X Offline
          xefil
          wrote on last edited by
          #9

          @gohan

          @gohan said in mysgw MQTT Issues:

          Yes, I use 10uF ceramic because of low ESR

          Actually I've only electrolytic ones, I'll try meanwhile with that, thanks!

          Simon

          1 Reply Last reply
          0
          • X Offline
            X Offline
            xefil
            wrote on last edited by xefil
            #10

            Hello!

            Added capacitor, but it's still not working.
            It has worked from some minutes but then no-more.
            Here results from Gateway and Node:

            Node:

             __  __       ____
|  \/  |_   _/ ___|  ___ _ __  ___  ___  _ __ ___
| |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __|
| |  | | |_| |___| |  __/ | | \__ \  _  | |  \__ \
|_|  |_|\__, |____/ \___|_| |_|___/\___/|_|  |___/
        |___/                      2.2.0

16 MCO:BGN:INIT NODE,CP=RPNNA---,VER=2.2.0
25 MCO:BGN:BFR
27 TSM:INIT
28 TSF:WUR:MS=0
30 TSM:INIT:TSP OK
31 TSM:INIT:STATID=27
33 TSF:SID:OK,ID=27
35 TSM:FPAR
1036 TSF:MSG:SEND,27-27-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
3043 !TSM:FPAR:NO REPLY
3045 TSM:FPAR
4046 TSF:MSG:SEND,27-27-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
6053 !TSM:FPAR:NO REPLY
6055 TSM:FPAR
7056 TSF:MSG:SEND,27-27-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
9063 !TSM:FPAR:NO REPLY
9065 TSM:FPAR
9069 TSF:MSG:SEND,27-27-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
10904 TSF:MSG:READ,0-0-27,s=255,c=3,t=8,pt=1,l=1,sg=0:0
10908 TSF:MSG:FPAR OK,ID=0,D=1
11077 TSM:FPAR:OK
11078 TSM:ID
11080 TSM:ID:OK
11081 TSM:UPL
18379 !TSF:MSG:SEND,27-27-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=NACK:1
20386 TSM:UPL
27659 !TSF:MSG:SEND,27-27-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=1,st=NACK:1
29666 TSM:UPL

            ..and here the gateway:

            Apr 10 21:49:36 mysensors-gateway mysgw: TSF:MSG:READ,27-27-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
Apr 10 21:49:36 mysensors-gateway mysgw: TSF:MSG:FPAR REQ,ID=27
Apr 10 21:49:38 mysensors-gateway mysgw: !TSF:MSG:SEND,0-0-27-27,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:0
Apr 10 21:49:38 mysensors-gateway mysgw: TSF:MSG:READ,27-27-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
Apr 10 21:49:38 mysensors-gateway mysgw: TSF:MSG:FPAR REQ,ID=27
Apr 10 21:49:40 mysensors-gateway mysgw: !TSF:MSG:SEND,0-0-27-27,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:0
Apr 10 21:49:41 mysensors-gateway mysgw: TSF:MSG:READ,27-27-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
Apr 10 21:49:41 mysensors-gateway mysgw: TSF:MSG:FPAR REQ,ID=27
Apr 10 21:49:43 mysensors-gateway mysgw: !TSF:MSG:SEND,0-0-27-27,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:0
Apr 10 21:49:44 mysensors-gateway mysgw: TSF:MSG:READ,27-27-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
Apr 10 21:49:44 mysensors-gateway mysgw: TSF:MSG:FPAR REQ,ID=27
Apr 10 21:49:46 mysensors-gateway mysgw: !TSF:MSG:SEND,0-0-27-27,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:0
Apr 10 21:49:47 mysensors-gateway mysgw: TSF:MSG:READ,27-27-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
Apr 10 21:49:47 mysensors-gateway mysgw: TSF:MSG:FPAR REQ,ID=27
Apr 10 21:49:48 mysensors-gateway mysgw: TSF:MSG:SEND,0-0-27-27,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
Apr 10 21:49:49 mysensors-gateway mysgw: TSF:MSG:READ,27-27-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1
Apr 10 21:49:49 mysensors-gateway mysgw: TSF:MSG:PINGED,ID=27,HP=1
Apr 10 21:49:50 mysensors-gateway mysgw: !TSF:MSG:SEND,0-0-27-27,s=255,c=3,t=25,pt=1,l=1,sg=0,ft=0,st=NACK:1
Apr 10 21:49:50 mysensors-gateway mysgw: TSF:MSG:READ,27-27-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1
Apr 10 21:49:50 mysensors-gateway mysgw: TSF:MSG:PINGED,ID=27,HP=1
Apr 10 21:49:52 mysensors-gateway mysgw: !TSF:MSG:SEND,0-0-27-27,s=255,c=3,t=25,pt=1,l=1,sg=0,ft=0,st=NACK:1
Apr 10 21:49:53 mysensors-gateway mysgw: TSF:MSG:READ,27-27-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1
Apr 10 21:49:53 mysensors-gateway mysgw: TSF:MSG:PINGED,ID=27,HP=1
Apr 10 21:49:54 mysensors-gateway mysgw: !TSF:MSG:SEND,0-0-27-27,s=255,c=3,t=25,pt=1,l=1,sg=0,ft=0,st=NACK:1
Apr 10 21:49:54 mysensors-gateway mysgw: TSF:MSG:READ,27-27-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1
Apr 10 21:49:54 mysensors-gateway mysgw: TSF:MSG:PINGED,ID=27,HP=1
Apr 10 21:49:55 mysensors-gateway mysgw: !TSF:MSG:SEND,0-0-27-27,s=255,c=3,t=25,pt=1,l=1,sg=0,ft=0,st=NACK:1
Apr 10 21:49:58 mysensors-gateway mysgw: TSF:MSG:READ,27-27-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1
Apr 10 21:49:58 mysensors-gateway mysgw: TSF:MSG:PINGED,ID=27,HP=1
Apr 10 21:50:00 mysensors-gateway mysgw: !TSF:MSG:SEND,0-0-27-27,s=255,c=3,t=25,pt=1,l=1,sg=0,ft=0,st=NACK:1
Apr 10 21:50:00 mysensors-gateway mysgw: TSF:MSG:READ,27-27-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1
Apr 10 21:50:00 mysensors-gateway mysgw: TSF:MSG:PINGED,ID=27,HP=1
Apr 10 21:50:01 mysensors-gateway mysgw: !TSF:MSG:SEND,0-0-27-27,s=255,c=3,t=25,pt=1,l=1,sg=0,ft=0,st=NACK:1
Apr 10 21:50:02 mysensors-gateway mysgw: TSF:MSG:READ,27-27-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1
Apr 10 21:50:02 mysensors-gateway mysgw: TSF:MSG:PINGED,ID=27,HP=1
Apr 10 21:50:03 mysensors-gateway mysgw: !TSF:MSG:SEND,0-0-27-27,s=255,c=3,t=25,pt=1,l=1,sg=0,ft=0,st=NACK:1
Apr 10 21:50:03 mysensors-gateway mysgw: TSF:MSG:READ,27-27-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1
Apr 10 21:50:03 mysensors-gateway mysgw: TSF:MSG:PINGED,ID=27,HP=1
Apr 10 21:50:05 mysensors-gateway mysgw: !TSF:MSG:SEND,0-0-27-27,s=255,c=3,t=25,pt=1,l=1,sg=0,ft=0,st=NACK:1

            Seems the GW is not able to send out the answer.
            BTW It gets every message from the node...

            Ideas?

            Thanks!

            Simon

            1 Reply Last reply
            0
            • gohanG Offline
              gohanG Offline
              gohan
              Mod
              wrote on last edited by
              #11

              move node closer. You could also try swapping the 2 radio modules to see if the problem changes.

              1 Reply Last reply
              0
              • X Offline
                X Offline
                xefil
                wrote on last edited by
                #12

                @gohan said in mysgw MQTT Issues:

                move node closer. You could also try swapping the 2 radio modules to see if the problem changes.

                Strange is, the same radios had worked well until I've switched to RPi GW.
                From the logs, correct me if I'm wrong, the issue seems to be on the gateway, not able to send the return/ack message:

                !TSF:MSG:SEND,0-0-27-27,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:0

                The node is sending well!

                TSF:MSG:SEND,27-27-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:

                Or not??

                I've added capacitors 100uf to both and, as well, added a copper coli antenna 868Mhz.
                Now the GW is 10meters far away from the node. There is only one wall between.
                I was testing to switch to RF69 radios which should be better if compared to nRF24L01+ in terms of range and walls.
                This is not what expected...

                I'll try to replace the radio on the GW side.

                Any other suggestion is well appreciated!

                Thanks, Simon

                1 Reply Last reply
                0
                • gohanG Offline
                  gohanG Offline
                  gohan
                  Mod
                  wrote on last edited by
                  #13

                  I forgot you had rfm69, so capacitor is not that important. Try to look at my rfm69 signal scanner and look for the code to print on debug the rssi of signal and output power and try to move around to see if you get any value change. I had problems with rpi3 gw using the alpha version, but on stable it works. You could also try to compile it as an ethernet gateway just to see if you get any changes. Can you also post the configure parameters you user?

                  X 1 Reply Last reply
                  0
                  • gohanG gohan

                    I forgot you had rfm69, so capacitor is not that important. Try to look at my rfm69 signal scanner and look for the code to print on debug the rssi of signal and output power and try to move around to see if you get any value change. I had problems with rpi3 gw using the alpha version, but on stable it works. You could also try to compile it as an ethernet gateway just to see if you get any changes. Can you also post the configure parameters you user?

                    X Offline
                    X Offline
                    xefil
                    wrote on last edited by
                    #14

                    @gohan said in mysgw MQTT Issues:

                    I forgot you had rfm69, so capacitor is not that important. Try to look at my rfm69 signal scanner and look for the code to print on debug the rssi of signal and output power and try to move around to see if you get any value change. I had problems with rpi3 gw using the alpha version, but on stable it works. You could also try to compile it as an ethernet gateway just to see if you get any changes. Can you also post the configure parameters you user?

                    Hello!
                    Which parameters?
                    compiling parameters of the GW?
                    I've configured it with:

                    ./configure --my-transport=rfm69 --my-rfm69-frequency=868 --my-gateway=mqtt --my-controller-ip-address=192.168.1.50 --my-mqtt-publish-topic-prefix=mygateway1-out --my-mqtt-subscribe-topic-prefix=mygateway1-in --my-mqtt-client-id=raspberryRFM69

                    About the rfm69 signal scanner, should it run on the node or on the RPi?
                    (where to find it?)

                    Thanks @gohan :-)

                    1 Reply Last reply
                    0
                    • gohanG Offline
                      gohanG Offline
                      gohan
                      Mod
                      wrote on last edited by
                      #15

                      https://forum.mysensors.org/topic/7822/portable-rfm69-signal-scanner/6

                      X 1 Reply Last reply
                      0
                      • gohanG gohan

                        https://forum.mysensors.org/topic/7822/portable-rfm69-signal-scanner/6

                        X Offline
                        X Offline
                        xefil
                        wrote on last edited by
                        #16

                        @gohan said in mysgw MQTT Issues:

                        https://forum.mysensors.org/topic/7822/portable-rfm69-signal-scanner/6

                        Ok, then I need to upload it on the node (which is on a little wooden bird house) and go around with my laptop connected on it :-) Not a problem.
                        But would that report issues on the GW RPi as well? How?

                        Meanwhile I can try to compile the ethernet version to give it a try.

                        Thanks, Simon

                        1 Reply Last reply
                        0
                        • X Offline
                          X Offline
                          xefil
                          wrote on last edited by
                          #17

                          Hello @gohan
                          Installed ethernet version:

                          ./configure --my-gateway=ethernet --my-port=5003

                          And it's even worst:

                          # ./mysgw -d
mysgw: Starting gateway...
mysgw: Protocol version - 2.2.0
mysgw: MCO:BGN:INIT GW,CP=RNNGL---,VER=2.2.0
mysgw: TSF:LRT:OK
mysgw: TSM:INIT
mysgw: TSF:WUR:MS=0
mysgw: !TSM:INIT:TSP FAIL
mysgw: TSM:FAIL:CNT=1
mysgw: TSM:FAIL:DIS
mysgw: TSF:TDI:TSL
mysgw: TSM:FAIL:RE-INIT
mysgw: TSM:INIT
mysgw: !TSM:INIT:TSP FAIL
mysgw: TSM:FAIL:CNT=2
mysgw: TSM:FAIL:DIS
mysgw: TSF:TDI:TSL
mysgw: TSM:FAIL:RE-INIT
mysgw: TSM:INIT
mysgw: !TSM:INIT:TSP FAIL
mysgw: TSM:FAIL:CNT=3
mysgw: TSM:FAIL:DIS
mysgw: TSF:TDI:TSL
mysgw: TSM:FAIL:RE-INIT
mysgw: TSM:INIT
mysgw: !TSM:INIT:TSP FAIL

                          Using the mqtt version at least the init gets completed.
                          Ideas?

                          Simon

                          1 Reply Last reply
                          0
                          • MasMatM Offline
                            MasMatM Offline
                            MasMat
                            wrote on last edited by
                            #18

                            Just a quick idea: are you powering the RFM69 from the Rpi?
                            I use a Rpi Zero W and when I powered my radio NRF24 from that it doesnt get enough juice even with caps.
                            I now use a bigger USB-wall wart and use AMS1117-3.3 to power the radio (PA-version) and added caps.

                            My two cents

                            X 1 Reply Last reply
                            1
                            • MasMatM MasMat

                              Just a quick idea: are you powering the RFM69 from the Rpi?
                              I use a Rpi Zero W and when I powered my radio NRF24 from that it doesnt get enough juice even with caps.
                              I now use a bigger USB-wall wart and use AMS1117-3.3 to power the radio (PA-version) and added caps.

                              My two cents

                              X Offline
                              X Offline
                              xefil
                              wrote on last edited by xefil
                              #19

                              @masmat said in mysgw MQTT Issues:

                              Just a quick idea: are you powering the RFM69 from the Rpi?
                              I use a Rpi Zero W and when I powered my radio NRF24 from that it doesnt get enough juice even with caps.
                              I now use a bigger USB-wall wart and use AMS1117-3.3 to power the radio (PA-version) and added caps.

                              My two cents

                              Hello,

                              I've tried to get 3.3V from external source, but same situation:

                              Apr 16 23:27:02 mysensors-gateway mysgw: MCO:BGN:INIT GW,CP=RPNGL---,VER=2.2.0
Apr 16 23:27:02 mysensors-gateway mysgw: TSF:LRT:OK
Apr 16 23:27:02 mysensors-gateway mysgw: TSM:INIT
Apr 16 23:27:02 mysensors-gateway mysgw: TSF:WUR:MS=0
Apr 16 23:27:02 mysensors-gateway mysgw: TSM:INIT:TSP OK
Apr 16 23:27:02 mysensors-gateway mysgw: TSM:INIT:GW MODE
Apr 16 23:27:02 mysensors-gateway mysgw: TSM:READY:ID=0,PAR=0,DIS=0
Apr 16 23:27:02 mysensors-gateway mysgw: MCO:REG:NOT NEEDED
Apr 16 23:27:02 mysensors-gateway mysgw: MCO:BGN:STP
Apr 16 23:27:02 mysensors-gateway mysgw: MCO:BGN:INIT OK,TSP=1
Apr 16 23:27:02 mysensors-gateway mysgw: GWT:RMQ:MQTT RECONNECT
Apr 16 23:27:02 mysensors-gateway mysgw: connected to 192.168.1.50
Apr 16 23:27:02 mysensors-gateway mysgw: GWT:RMQ:MQTT CONNECTED
Apr 16 23:27:02 mysensors-gateway mysgw: GWT:TPS:TOPIC=mygateway1-out/0/255/0/0/18,MSG SENT
Apr 16 23:27:42 mysensors-gateway mysgw: TSF:MSG:READ,1-27-177,s=48,c=0,t=32,pt=7,l=23,sg=1: 0
Apr 16 23:27:42 mysensors-gateway mysgw: !TSF:MSG:LEN,7!=32
Apr 16 23:27:45 mysensors-gateway mysgw: TSF:MSG:READ,27-27-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
Apr 16 23:27:45 mysensors-gateway mysgw: TSF:MSG:BC
Apr 16 23:27:45 mysensors-gateway mysgw: TSF:MSG:FPAR REQ,ID=27
Apr 16 23:27:45 mysensors-gateway mysgw: TSF:PNG:SEND,TO=0
Apr 16 23:27:45 mysensors-gateway mysgw: TSF:CKU:OK
Apr 16 23:27:45 mysensors-gateway mysgw: TSF:MSG:GWL OK
Apr 16 23:27:47 mysensors-gateway mysgw: !TSF:MSG:SEND,0-0-27-27,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:0
Apr 16 23:27:51 mysensors-gateway mysgw: TSF:MSG:READ,27-27-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
Apr 16 23:27:51 mysensors-gateway mysgw: TSF:MSG:BC
Apr 16 23:27:51 mysensors-gateway mysgw: TSF:MSG:FPAR REQ,ID=27
Apr 16 23:27:51 mysensors-gateway mysgw: TSF:CKU:OK,FCTRL
Apr 16 23:27:51 mysensors-gateway mysgw: TSF:MSG:GWL OK
Apr 16 23:27:53 mysensors-gateway mysgw: !TSF:MSG:SEND,0-0-27-27,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:0

                              Possible the problem is only sending and not receiving?
                              I've not tested the signal scanner right now.
                              I was hoping it's a power issue :'(

                              Simon

                              1 Reply Last reply
                              0
                              • X Offline
                                X Offline
                                xefil
                                wrote on last edited by
                                #20

                                Hello @gohan ,

                                I was able to compile correctly the network IP mode. I had compiled it with the wrong transport.
                                BTW, now it initialized correctly, BUT same problems.
                                I've replaced the radio as well (only on the gateway).
                                Here the logs:

                                mysgw: Starting gateway...
mysgw: Protocol version - 2.2.0
mysgw: MCO:BGN:INIT GW,CP=RPNGL---,VER=2.2.0
mysgw: TSF:LRT:OK
mysgw: TSM:INIT
mysgw: TSF:WUR:MS=0
mysgw: TSM:INIT:TSP OK
mysgw: TSM:INIT:GW MODE
mysgw: TSM:READY:ID=0,PAR=0,DIS=0
mysgw: MCO:REG:NOT NEEDED
mysgw: Listening for connections on 0.0.0.0:5003
mysgw: MCO:BGN:STP
mysgw: MCO:BGN:INIT OK,TSP=1
mysgw: TSF:MSG:READ,27-27-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
mysgw: TSF:MSG:BC
mysgw: TSF:MSG:FPAR REQ,ID=27
mysgw: TSF:PNG:SEND,TO=0
mysgw: TSF:CKU:OK
mysgw: TSF:MSG:GWL OK
mysgw: !TSF:MSG:SEND,0-0-27-27,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:0
mysgw: TSF:MSG:READ,27-27-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
mysgw: TSF:MSG:BC
mysgw: TSF:MSG:FPAR REQ,ID=27
mysgw: TSF:CKU:OK,FCTRL
mysgw: TSF:MSG:GWL OK

                                As you can see the SEND message fails.
                                I'll try now to move the node closer and then try the scanner.

                                Hope it helps :-(

                                Simon

                                1 Reply Last reply
                                0
                                • gohanG Offline
                                  gohanG Offline
                                  gohan
                                  Mod
                                  wrote on last edited by
                                  #21

                                  You have to check both gw and node at same time in order to understand if message is delivered but ack fails or else.

                                  X 1 Reply Last reply
                                  0
                                  • gohanG gohan

                                    You have to check both gw and node at same time in order to understand if message is delivered but ack fails or else.

                                    X Offline
                                    X Offline
                                    xefil
                                    wrote on last edited by
                                    #22

                                    @gohan said in mysgw MQTT Issues:

                                    You have to check both gw and node at same time in order to understand if message is delivered but ack fails or else.

                                    Of course. I'll provide details this evening ;-)

                                    1 Reply Last reply
                                    0
                                    Reply
                                    • Reply as topic
                                    Log in to reply
                                    • Oldest to Newest
                                    • Newest to Oldest
                                    • Most Votes

                                    19

                                    Online

                                    11.7k

                                    Users

                                    11.2k

                                    Topics

                                    113.1k

                                    Posts


                                    Copyright 2025 TBD   |   Forum Guidelines   |   Privacy Policy   |   Terms of Service
                                    • Login
                                    • Don't have an account? Register
                                    • Login or register to search.
                                    • First post
                                      Last post
                                    0
                                    • MySensors
                                    • OpenHardware.io
                                    • Categories
                                    • Recent
                                    • Tags
                                    • Popular